Edit To Or From Another Vcr/Other Devices - JVC HM-DH30000U Instructions Manual

64
EN
Edit To Or
From Another
VCR/Other
Devices
You can use your VCR as the playback or recording VCR.
Refer also to the other VCR's instruction manual for
connection and its operations.
This VCR supports the copy protection technologies
of DTLA (Digital Transmission Licensing
Administrator). These technologies are admitted by
DTLA (Digital Transmission Licensing
Administrator).
It is impossible to dub copy-limited signals between
the devices which supports copy protection
technologies of DTLA . It is impossible to dub to
other tapes the program which only one recording
is permitted.
When connecting to other devices, only the
operation of the devices which supports DTLA is
guaranteed. The operation of non-DTLA-supported
devices is not guaranteed.
Connection
Ex. When using this VCR as the playback VCR
A
This VCR (for playback)
Y P /C P /C
B B R R
R AUDIO L VIDEO
OUT
To AUDIO
OUT
Audio cable
(supplied)
To Audio
Input
Another VCR (for recording)
CABLE BOX
VHF/UHF
ANTENNA
IN(L-1)
IN i.LINK IN/OUT
DV IN
S200
R AUDIO L (MONO) VIDEO
REMOTE PAUSE/ DIGITAL OUT
AV COMPU LINK OPTICAL
TV PCM/DOLBY DIGITAL
IN (L-2)
OUT
S VIDEO S VIDEO
OUT IN
To S VIDEO
OUT
S-video cable
(supplied)
To S-video
Input
1
Make connections
A
S-VHS/VHS connection
Connect an audio cable between the playback
VCR's audio output connectors and the
recording VCR's audio input connectors.
When using this VCR as the recording VCR,
connect this VCR's audio input connectors to
the audio output connectors on the other VCR.
If the playback VCR is monaural, connect the
audio output connector on the playback VCR
to the left audio input connector on this VCR.
NOTE:
If another VCR does not have S-video input/output
connectors, use a video cable.
i.LINK connection
B
Connect an i.LINK cable between the playback
VCR's i.LINK input/output connector and the
recording VCR's i.LINK input/output connector.
NOTES:
When dubbing a D-VHS tape to a D-VHS tape, it is
recommended to set the recording VCR to the same
recording speed as the souce tape on the playback VCR.
Depending on the devices equipped with the i.LINK
connector which is connected to the VCR, picture
noise on this VCR may differ from the noise on the
connected devices. It is caused by the differnce of
the data processing method.
Connection with certain product(s) may not be
supported. ( "ATTENTION" on the back cover.)
B
This VCR
Y P B /C B P /C
R R
R AUDIO L VIDEO
OUT
Another VCR
EDITING (cont.)
CABLE BOX
VHF/UHF
ANTENNA
IN(L-1)
IN i.LINK IN/OUT
DV IN
S200
R AUDIO L (MONO) VIDEO
REMOTE PAUSE/ DIGITAL OUT
AV COMPU LINK OPTICAL
TV PCM/DOLBY DIGITAL
IN (L-2)
S VIDEO S VIDEO OUT
OUT IN
To i.LINK IN/
OUT connector
i.LINK cable
(not supplied)
To i.LINK IN/
OUT connector