I.link Set Up - JVC HM-DH30000U Instructions Manual

58
EN

i.LINK Set Up

VCR TV CABLE/DBS
1
4
7
2 – 4
1
2 3
5 6
8 9
0
3
2 4
OTHER USEFUL FUNCTIONS (cont.)
i.LINK set up for connected device
When you connect i.LINK compatible devices to this
VCR, an i.LINK device number is asigned to each device
in the order of connection.
If you want to change the number, follow the procedure
below.
1
Access Main Menu screen
Press MENU.
2
Access i.LINK Set Up screen
Press %fi to move the highlight bar (arrow) to
"i.LINK SET UP", then press OK.
3
Confirm LINC setting
Check that "LINC" is
set to "AUTO". If not,
press @ # to set to
"AUTO".
4
Reset Number
Press %fi to move the
highlight bar (arrow) to
"RESET NUMBER",
then press OK.
5
Set Number again
Connect the external devices one by one.
• Make sure to connect the VCR's AC power plug
to the AC outlet and turn on the external device
before connection.
• Each device will be numbered in the order of
connection.
NOTE:
If you do not want to set i.LINK device number, set "LINC" to
"OFF" in step 3 .
i.LINK SET UP
3 LINC
AUTO
RESET NUMBER
PRESS (5∞), THEN (2 3)
PRESS (MENU) TO END
i.LINK SET UP
LINC AUTO
3 RESET NUMBER
PRESS (5∞), THEN (OK)
PRESS (MENU) TO END