Setting Clock Manually - Manual Clock Set - JVC HM-DH30000U Instructions Manual

12
EN
VCR TV CABLE/DBS
1
4
7
4 5
7
8
2 3
5 6
8 9
0
4 – 7
INITIAL SETTINGS (cont.)
Setting clock manually
— Manual Clock Set
First follow steps 1 to 3 on page 10, then go to the
following steps.
4
Set time
Press @ # until the
desired time appears,
then press fi.
Holding @ # changes
the time in 30-minute
intervals.
When the time is
entered manually, "AUTO CLOCK" is
automatically set to "OFF", and "HOST CH"
and "TIME ZONE" disappear.
5
Set date
Press @ # until the desired date appears, then
press fi.
Holding @ # changes the date in 15-day
intervals.
6
Set year
Press @ # until the desired year appears.
7
Select D.S.T. mode
Press %fi to move the highlight bar to "D.S.T.",
then press @ # to select "ON" or "OFF".
ON– Adjustment will be made by the built-in
clock itself.
OFF– Select when Daylight Saving Time does
not apply to you.
8
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press %fi repeatedly until the item you want to change
blinks, then press @ #.
CLOCK SET UP
TIME DATE YEAR
– –:– –AM 1/ 1 2001
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (5∞), THEN (2 3)
PRESS (MENU) TO END