Table of Contents
Advertisement
Edit To Or
From Another
VCR
Player
Your VCR
VIDEO OUT
AUDIO OUT
VIDEO
IN
I
t
AUDIO
IN
Recorder
Another
VCR
You can use your VCR as the player
or the recorder.
MAKE CONNECTIONS
Connect an AV cable between the player's VIDEO OUT
and AUDIO OUT connectors and the recorder's VIDEO
IN and AUDIO
IN connectors.
• When using your VCR asthe recorder and a monaural
VCR as the player, connect the player's AUDIO OUT
connector to the AUDIO IN L connector on the recorder.
LOAD CASSEI-rES
Insert the playback cassette into the player and the
cassette to be recorded on into the recorder.
SETRECORDER'S INPUT
MODE
Set to AUX. With this VCR, press NUMBER key "O" (AU
appears on the front display panel in place of a channel
number).
NOTE:
When using this VCR as the recorder, make sure to select
"FRONT" or "REAR"(depending on which input connectors
you use)at the Aux Input Screen. (Toselect the correct AUX
input connector, follow steps4, 5, 9- 11 from the "Edit
From A Camcorder" section, _:_ lag. 42.)
STARTPLAYER
Set to its play mode.
NOTE:
If the player is equipped with a superimpose/OSD
disable feature then set "SUPERIMPOSE" to OFF before
pressing PLAY F_" pg. 28).
START RECORDER
Set to its record mode.
NUMBER
"0"
Advertisement
Table of Contents
