Service Scans, Vitotronic 300, GW5B
Calling up the Service Menu
Service menu overview
Service
Exiting the Service Menu
50
Diagnosis
Actuator test
Coding level 1
Coding level 2
Fault history
Service functions
End service?
Vitotronic 300, GW5B & MW1B Installation and Service
Press OK and
simultaneously for approx. 4 sec.
General
Brief scan
Reset data
Participant check
Service PIN
Service reset
"Coding level 2" is only displayed if this level has
been enabled:
Press OK and
simultaneously for approx. 4 sec.
1. Select "End service?".
2. Select "Yes".
3. Confirm with OK.
Note: The system exits the service menu automatically
after 30 min.