Table of Contents
Advertisement
After Installation ...
Checklist
Service Binder
Start-up Instructions
1. Check all connections
2. Ensure settings on fixed high limit and adjustable high limit are correct
3. Ensure correct operational settings on control are set
Please verify the following points
(check with a pen) and take corrective
actions as necessary:
j Have all limit capillaries and sensors
been completely inserted into the
boiler 5-point sensor wells?
j Have all electrical connections been
made as discussed in the previous
section?
Based upon the Section entitled "Overview" on page 8, ensure all electrical
connections have been made according to the diagram.
See pages 12 and 13.
Read Operating Instructions and User's Information Manual of Vitotronic.
The installer of the system is also responsible to ensure the system
operator/ultimate owner is made familiar with the system functioning, its
activation, and its shut-down.
Appendix / Start-up
j Did all plug-in connectors engage
with a "click" ?
j Have the settings of both the fixed
high limit and the adjustable high
limit been checked and altered as
necessary?
j Has the Pump Junction Box been
correctly wired (if applicable)?
1. File all technical documentation into
the Service Binder.
2. Install a protective service box
(optional equipment) near the boiler
and store the Service Binder in this
location.
15
Advertisement
Table of Contents
