EN 140
9.
Q528.1E LA
9.7.5
PACIFIC 3 (T6TF4HFG)
The PACIFIC 3 performs the following tasks:
•
Colour processing.
•
Sharpness improvement.
•
Backlight dimming.
•
AmbiLight.
•
Display (LVDS) switch on/off.
•
Pattern generator.
The PACIFIC 3 interfaces:
Pacific CMOS/LVDS input & LVDS output
Single LVDS - in ( PNX8535)
Double LVDS in ( FPGA)
A configuration flash memory is added (item 7GE1).
Circuit Descriptions, Abbreviation List, and IC Data Sheets
Figure 9-18 PACIFIC 3 CMOS + LVDS interface
•
Video input:
–
US sets: single LVDS from PNX8535, dual LVDS from
CYCLONE II
–
CMOS from PNX5050
•
Video output: LVDS (single or dual) to display or DFI panel.
•
Backlight dimming: pulse-width modulated (PWM) followed
2
by PWM to I
C conversion.
•
AmbiLight: pulse-width modulated (PWM) followed by
microprocessor.
Refer to figure "PACIFIC 3 CMOS + LVDS interface" for details.
PWM ambi
to µP
Single or double
LVDS -out to display
H_16770_137a.eps
290307