Icom IC-7800 Instruction Manual page 210

16
UPDATING THE FIRMWARE
Click [�] to select the firmware file.
Type the IC-7800's IP address here.
Click to start the
firmware update
Click [OK] to finish the firmware update.
r Select the firmware file, that has "dat" extension
(e.g.: 7800_110.dat)
• Click [�], then select the file, as well as the location.
t Type the IC-7800's IP address into "IC-7800 IP Ad-
dress" text box.
y Click [Start].
u The window as at left appears.
Read the precaution in the window carefully.
i Click [Yes] if you want to start the firmware update.
o The screen as at left is displayed.
• The following dialog appears in the IC-7800 display.
R WARNING!: NEVER turn the IC-7800 power
OFF at this stage.
The transceiver firmware will be damaged.
!0 Click [OK] to finish the firmware update.
• The "FIRMWARE UPDATING" dialog as above disap-
pears.
!1 Push [POWER] to turn the IC-7800 power OFF,
then ON again.
16-8
.