Icom IC-7800 Instruction Manual page 160

12
SET MODE
■ Display set mode
Sets the memory name indication, during memory
mode operation, ON and OFF. (default: ON)
Selects the pop-up display for the APF filter width
from ON and OFF.
(default: ON)
Turns the pop-up indication capability when the notch
filter width is changed from ON to OFF.
(default: ON)
Turns the screen saver function ON (15, 30 or 60
minutes) and OFF.
Selects the screen saver type from "Bound," "Rota-
tion" and "Twist."
Select "ON" when the external display is connected.
(default: OFF)
Selects the suitable pulse level for the connected ex-
ternal display from H and L. (default: H)
Turns the opening message screen indication capa-
bility ON and OFF. (default: ON)
(continued)
(default: 60 min.)
(default: Bound)
12-12
• ON : The programmed memory name is displayed
above the frequency indication.
• OFF : No memory name is displayed even a mem-
ory name is programmed.
The screen saver will acts when no operation is per-
formed for the selected time period to protect the LCD
from the "burn-in" effect.
The screen saver indication can be displayed for your
reference while pushing and holding [F-5•PREVIEW].
• At least 800×600 pixel resolution is required for the dis-
play.