Replacing The Display Assembly - Dell XPS M140 Service Manual

1 display assembly
2 Mini PCI antenna cables 4 antenna cable connectors

Replacing the Display Assembly

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
2. Follow the instructions in
3. Align the new display assembly over the screw holes in the base of the computer.
4. Replace the four M2.5 x 5-mm screws (two on each side) to secure the display assembly to the base of the
computer.
5. Connect the Mini PCI antenna cable connectors and press the cables into the retaining clips on the base of the
computer.
6. Connect the display cable to the system board.
7. Replace the keyboard (see
8. Replace the hinge cover (see
3 antenna cable retaining clips 5 display cable
Preparing to Work Inside the Computer
Removing the Display
Replacing the Keyboard).
Replacing the Hinge
6 M2.5 x 5-mm screws (4)
Assembly.
Cover).