About The Device Security Screw; Removing The Optical Drive - Dell XPS M140 Service Manual

Back to Contents Page
Optical Drive
Dell™ XPS M140 Service Manual

About the Device Security Screw

Removing the Optical Drive

Replacing the Optical Drive
About the Device Security Screw
NOTE: You do not need to install the device security screw unless you want to prevent the optical drive from
being easily removed.
Your Dell™ computer ships with a CD/DVD drive installed in the optical drive bay along with an M2.5 x 8-mm
device security screw. If the security screw is not already installed, it will be packaged separately. When you insert a
drive into the bay, you can install the device security screw to prevent the drive from being easily removed.
Removing the Optical Drive
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To prevent damage to optical drives and other devices, store them in a safe, dry place when they are
not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
1. Follow the instructions in
2. Use a Phillips screwdriver to remove the M2.5 x 8-mm device security screw, if installed, from the indention in
the bottom of the computer.
Preparing to Work Inside the Computer.