Version Of The Machine With Cutters; Adjusting The Tilling Depth; Picture 4 - Machine: Version With Cutters; Figura 5 - Adjusting The Tilling Depth - Benassi MC 3300 Operation And Maintenance Manual

Version of the machine with cutters

In this version the machine has cutters to till the soil. The external parts of the cutters and of the protective
case can be disassembled, so you can vary the width of the machine.
The widths you can obtain are as follows.
Protecti
ve case
Hoe-
shaped
cutters
Picture 4 – Machine: version with cutters
To assemble the implements, consult the manuals
provided by the producing firm.
WHATEVER WIDTH YOU DESIRE, THE
CUTTERS MUST BE SET SYMMETRICALLY
WITH THE AXE OF THE MACHINE.
DANGER
INSTABILITY: IF THE CUTTERS ARE NOT
ASSEMBLED
MACHINE
AND CAN OVERTURN.

Adjusting the tilling depth

The hoe-shaped cutters have a device to adjust the depth of tilling of the soil.
DANGR OF
BRUISING AND
CRUSHING
Tilling depth adjuster
Figura 5 – Adjusting the tilling depth
OF OVERTURNING
SYMMETRICALLY,
IS UNSTABLE, DANGEROUS
OPERATION AND MAINTENANCE MANUAL
CUTTER WIDTH (mm)
VOLPINO
570
460
370
280
AND OF
THE
OPERATIONS TO
PERFORM WHEN THE
MACHINE IS TURNED
OFF AND STABLE
LARGHEZZA (mm)
WEAR PROPER
GLOVES
Page 9 of 22
CASTORO
760
630
480
360