Positions And Controls Of Levers; Working Procedure; Picture 7 - Positions And Controls Of Levers - Benassi MC 3300 Operation And Maintenance Manual

Positions and controls of levers

The position of motion lever and the effect obtained by using them depend on the configuration of the
machine (normal or reversed). The pictures below show the two different situations.
Power takeoff lever
Power takeoff can be engaged only
with forward speed.
To engage takeoff, engage clutch and then
push the lever towards the machine.
To disengage it, pull the lever towards you.
Speed direction lever
To drive forward, engage clutch and then push
lever towards the machine. To drive
backwards, pull the lever towards you.
Before driving backwards, power
takeoff ought to be disengaged.
Speed lever
To engage gears, engage clutch and move the
lever until it stops on the number of the speed
you want, which is written on the gear.
Picture 7 – Positions and controls of levers

Working procedure

When working on sloped surfaces, you should drive the tractor parallel with
the slope and not uphill nor downhill. Be very careful while changing direction.
OPERATION AND MAINTENANCE MANUAL
Power takeoff lever
To engage power takeoff lever, engage clutch
and then pull the lever towards you.
To disengage it, push the lever towards the
machine.
Speed direction lever
To drive forward, engage clutch and then push
lever towards the machine. To drive
backwards, pull the lever towards you.
Speed lever
To engage gears, engage clutch and move the
lever until it stops on the number of the speed
you want, which is written on the gear.
In reverse position, 4
be used.
th
speed cannot
Page 11 of 22