Machine Identification - Benassi MC 2300 REVERSO Instruction And Maintenance Manual

SpA
ALSO AVAILABLE:
•
Transfer wheel unit cod. 97063000.
•
Iron wheel torque Ø 370 x 100 cod. 97063100.
•
Iron wheel torque Ø 370 x 50 cod. 97063200.
•
Front ballast Kg. 10 cod. 98061200.
•
Coupler head cod. 91063400.
•
Wheel spacer torque cod. 94961800.
On the machine, equipment and this manual there are symbols, writings and
directions accompanied by this sign: it suggests the presence of a potential
danger. Pay attention when you see it, read carefully and keep to what it says.
Do not remove or make the decalcomania's present on the machine unreadable.
It is obligatory to clean them when dirty and immediately change them if detached or damaged.
The machine identifies itself with the type and part number of the gearbox. The part number of the engine is stamped (when
it exists) by the producer on the plate of the engine itself or on the engine case. Identification data of the machine are carried
forward on a plate placed on the machine.
Report the label's data of the machine on the label's facsimile in order to have them always close at hand when necessary.
6 ‐ACCESSORIES
Mowing unit
cm.
38-48
Cod. 94761600
Cutting unit cm. 92 with special
cutterbar and spare blade
Cod. 94564600
Snow turbine cm.50
single-stage
Cod. 97561200
Single-blade lawn mower cm.52
Cod. 96660600
Weight for mowing bar (only for
version with YANMAR engine)
Cod. 98061400
Picture 3
7 ‐SYMBOLS and DECALCOMANIA'S
8 –MACHINE IDENTIFICATION
Fig. 4-
MC 2300
Wheels torque 3.50.6
Cod. 97063300
Wheels torque 13.500.6
Cod. 97063400
Plough
Cod. 91062500
Lister with arm
Cod. 91063500
Front-end leveller
Cod. 97561100
Kit for wheels torque 3.50.8
Cod. 97063500
5