Starting The Machine - Benassi MC 3300 Operation And Maintenance Manual

Starting the machine

To start the machine, follow these instructions:
BEFORE STARTING THE MACHINE, MAKE SURE THAT:
- VENTILATION IS ENOUGH (YOU SHOULD GO OUTSIDE);
- ALL THE CONTROL LEVERS ARE DISENGAGED; THE SPEED LEVER MUST
BE SET ON NEUTRAL POSITION (0);
- THE FUEL TANK IS FULL ENOUGH.
FINALLY, OPEN THE FUEL TAP
1 – With your left hand, press
the red lever (motor-stop)
4 – Now, loose the levers while
keeping on pressing the button
If the machine has manual starting,
with self-winding rope (see the
engine operating and maintenance
manual):
If the machine has ignition (see the
engine operating and maintenance
manual):
2 – With you left hand, while
keeping on pressing the red lever,
grip the clutch lever
In this way the gear is
disengaged from the engine
and the machine can be
started
You can unlock by gripping the
clutch lever completely.
6 – Standing in front of the
machine, grip the self-winding
rope
6' – Turn the key: a warning light will light up.
Then turn the key again and loose it when
the engine is running.
OPERATION AND MAINTENANCE MANUAL
3 – While keeping the two
levers, with your right hand
press the button on the side
5 – Open the throttle fully
7 – Pull the rope strongly: the
engine will start
DANGER OF
BRUISING AND
CRUSHING
Page 14 of 22