Ordering Replacement Parts; Product Reference Information; Wiring Diagram - Superior 40 Signature series Care And Operation Instructions Manual

INNOVATIVE HEARTH PRODUCTS • POWER VENT DV GAS FIREPLACES (DRT63__TYN / DRC63__TYN) • CARE AND OPERATION INSTRUCTIONS

ORDERING REPLACEMENT PARTS

A complete parts list is found at the end of
this manual. Use only parts supplied from the
manufacturer.
With proper care and maintenance, your appli-
ance will provide many years of enjoyment. If
you should experience any problem, first refer
to the troubleshooting guide in this manual.
If problem persists, contact your Innovative
Hearth Products dealer or distributor.
Normally, all parts should be ordered through
your Innovative Hearth Products distributor or
dealer. Parts will be shipped at prevailing prices
at time of order.
When ordering repair parts, always provide:
1. The model number of the appliance.
2. The serial number of the appliance.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the appliance.

WIRING DIAGRAM

This wiring diagram is provided for reference
purposes only. This information is also provided
on schematics attached directly to the appliance
on a pullout panel located within the control
compartment.
Schematic Representation Only
COLOR CODE:
B = Black
BB = Brown w/Black Stripe
BG = Brown w/Green Stripe
BL = Blue
BR = Brown
G = Green
GY = Gray
O = Orange
R = Red
W = White
Y = Yellow
Figure 21 - Electronic Wiring Diagram
18
If you encounter any problems or have any
questions concerning the installation or ap-
plication of this system, please contact your
dealer or distributor.
Innovative Hearth Products
1508 Elm Hill Pike, Suite 108
Nashville, TN 37210
Visit us at
www.superiorfireplaces.US.com
Fireplace Model Number ________________________________________________
Fireplace Serial Number _________________________________________________
Date Installed _________________________________________________________
Type of Gas Used in Fireplace ____________________________________________
Dealer Name _________________________________________________________
CAUTION: LABEL ALL WIRES PRIOR
TO DISCONNECTION WHEN SERVIC-
ING CONTROLS. WIRING ERRORS
CAN CAUSE IMPROPER AND DANGER-
OUS APPLIANCE OPERATION.
Battery Holder with Switch
Battery Holder w/Switch
ON/ Remote
Main Wire
/OFF
Harness
Y
BR
G
Note: On models
without pressure
switch, these
connectors are
Y
Battery Holder
plugged together.
Wire Harness
Air Pressure Switch
Power Vent Only
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
885 Valve
ON/Remote/OFF
B
O
R
BL
G
W
R B
Reset Switch
BL
(See instructions.)
R
O
G
B
GR
WH
B
W
G
Power Vent Blower
Power Vent
Models Only

PRODUCT REFERENCE INFORMATION

We recommend that you record the important
reference information about your fireplace in
the space provided below.
Please call Innovative Hearth Products for the
phone number of your nearest Innovative Hearth
Products dealer who will answer your questions
or address your concerns.
ATTENTION: AU MOMENT DE
L'ENTRETIEN DES COMMANDES,
ÉTIQUETEZ TOUS LES FILS AVANT DE
LES DÉBRANCHER. DES ERREURS DE
CÁBLAGE PEU-VENT ENTRAÎNER UN
FONCTIONNEMENT INADÉQUAT ET
DANGEREUX.
IPI Pilot
Pilot Tube
Optional
Split Flow
B
Control Module
Fuse
B B
W
Main Power Cord
Flame
Sensor
Spark
Electrode
B
Ground Y
G