Lubrication - Epson Stylus Pro GS6000 Service Manual

Epson Stylus Pro GS6000

6.5 Lubrication

OUTLINE
To maintain the functions and performance of the printer, make sure to properly
lubricate the parts/units specified in this section as necessary when replacing or
maintaining them.
Make sure not to lubricate each point more than necessary.
C A U T I O N
Use the specified grease only.
To lubricate a part already attached, wipe off the grease on the
part completely first, then apply the specified amount of grease
to it.
Table 6-3. Grease Application
Name
GREASE, G-26 Dow Corning Toray Co.,Ltd.
Supermulpus #32
LUBRICATION POINTS LIST
No. Lubrication Point
1 Gears of Pressure Lever
2 Pressure cams
3 Head U/D cams (both)
4 PG sliding sections (both)
5 Gears of Front Cover (both sides)
6 Top frame of Carriage Lock Solenoid
7 Spring hook of Pressure Lever
8 Sides of Pressure Lever collar
9 Sliders of Cap Assy
10 Rails for Carriage bearings (backside)
11 Rails for Carriage bearings (front side)
MAINTENANCE
Company Part No.
1080614
--- 1432563
Remarks
p253
p253
p254
p254
p254
p254
p255
p255
p255
p256
p256
[Lubrication 1]
Lubrication Point Gears of Pressure Lever
Lubricant GREASE, G-26
Amount Three drops (rice grain size)
Remarks Apply it on the contact point of the large black gear and the small black
gear.
As seen from the right side
Pressure Lever's gears
[Lubrication 2]
Lubrication Point Pressure cams
Lubricant GREASE, G-26
Amount One drop (rice grain size)
Remarks Apply it on the sliding section of each pressure cam.
As seen from the rear
Lubrication
Point
Lubrication
Revision F
Lubrication
Point
Pressure cam
Pressure Roller holder
253
Confidential