Wallvault System (Usfm 100 Short Throw Wall Mount Kit) - Extron electronics PVS 405D Installation Manual

C. WallVault System (USFM 100 Short Throw Wall Mount Kit)
Arm Cover (top)
Arm Cover (bottom)
Where it goes: Installs onto a wall close the short throw projector location.
•
What it does: Supports the short throw projector and hides from view the installed PVS 405D switcher,
•
power supply, and any installed optional accessories.
WARNING:
Before commencing installation, the wall structure must be examined to determine if it is suitable for the
proper installation and support of this product. If needed, the installer should reinforce the wall. Drywalls should
have a minimum thickness of 1/2 inch and a maximum thickness of 5/8 inch.
Improper installation of this product could lead to serious injury.
NOTE: Before installation, see the user manual for the display device to determine the proper location and placement
of the mount. Take into consideration the projector lens offset, screen size, screen aspect, and projected image throw
distance. See the USFM 100 specifications (available at www.extron.com) for the dimensions of the USFM 100 to aid
in this determination.
USFM 100
Base Plate
Arm Cover (front)
Plastic Enclosure Cover
Cutout for
Signal Cable
Level
Access
USFM 100 Base Plate.
PoleVault Digital Systems • Installation — Stage 4 (USFM 100 and PVS 405D)
Boom Arm
Base Plate
Device Mounting Plate
Mounting
Marker for
Holes
Pilot Hole
47