Setting The Ptz - Samsung SRD-830 User Manual

• CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.)

Refer to "Using Virtual Keyboard". (Page 40)
• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.

If set to <OFF>, the channel is not listed in the Auto Sequence mode.
• Progressive : You can set the progressive camera to ON/OFF.

J
If you set it to <ON> for the progressive camera, screen flickering will be reduced.
• Screen Setup : The video appeared on the screen may vary
depending on the channel's camera, configure the DVR
display to your preferences.
Select a channel and adjust the <
< (Contrast)>, and <
• Press the <Init> to initialize settings back to the default 50.
6. When the camera setup is done, press <OK>.

Setting the PTZ

To use Camera's PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the "Remote Devices" settings. (Page 52)
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Camera>, and press [ENTER] button.
2. Select <PTZ>.
A window of PTZ settings appears.
3. Use direction buttons ( ◄ ►) to move to a desired
item, and select it.
• Port : Select a port control method for the camera that is
connected to a channel.

You have two choices : <RS-485> and <Coaxial>.

This is applicable only to SRD-830DC/850DC/870DC/1610DC/
1630DC/1650DC/1670DC.
• ID : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote control or front panel.
• Protocol : Set the protocol of the connected camera of each
channel.
M 
You can check the camera's ID and protocol if you turn the
camera off and on after connecting it to the DVR.
(Page 73)

For the <Coaxial> type, CCVC and PELCO-C protocols are
supported.
4. When the PTZ setup is done, press <OK>.
(Brightness)>,
(Color)> of the selected channel.
Screen Setup
CH1 50 50 50
OK Cancel
Camera
PTZ
Camera
CH ID
1 0
>
2 1
>
3 2 >
4 3 >
5 4
>
6 5
>
7 6 >
8 7 >
OK Cancel
<SRD-830/830D/850/850D/870/870D/1610/
1610D/1630/1630D/1650/1650D/1670/1670D>
Camera
PTZ
Camera
CH Port  ID

1 RS-485 0 >
2 RS-485  1
>
3 RS-485  2
>
4 RS-485  3
>

5 RS-485 4 >
6 RS-485  5 >
7 RS-485  6
>
8 RS-485  7
>
OK Cancel
<SRD-830DC/850DC/870DC/ SRD DC/ DC/
1610DC/1630DC/1650DC/1670DC>
Init Apply to All CH
Protocol 
None 
None 

None
None 
None 
None 

None
None 
Previous/Next Page
Protocol

None
None 
None 
None 

None
None 
None 
None 
Previous/Next Page
DC/
English _49