Connecting Web Viewer - Samsung SRD-830 User Manual

web viewer

CONNECTING WEB VIEWER

1. Open your web browser and type the IP address or URL
of DVR into the URL address box.
M
The basic URL of the DVR is as following in case of MAC
address :

00-00-F0-ab-cd-ef : nabcdef.websamsung.net

00-16-6c-ab-cd-ef : mabcdef.websamsung.net

00-68-36-ab-cd-ef : pabcdef.websamsung.net

00-09-18-ab-cd-ef : iabcdef.websamsung.net

You can also use registered URL which setups up in the Setup menu of your DVR.
The basic URL of the DVR is as following in case of iPOLiS address :

http://www.samsungipolis.com/Product ID
- Product ID : ID that is registered at iPOLiS homepage.

You can also use registered URL which setups up in the Setup menu of your DVR.
2. Set the Admin ID and password same to those of the DVR
Admin.
For general users, enter the DVR user ID and password.

J
The default password can be exposed to a hacking thread so
it is recommended to change the password after installing the
product.

Set password for your wireless network if you use the product with a wireless router. Being not protected with
password or using the default wireless router password may expose your video data to potential threat.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

M
It allows up to 10 simultaneous access including the Admin and general users.

It does not allow multiple login of the Admin user.

Initial password of the Admin user is set to "4321".

Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.

Normal users should have set <Viewer> under <Permission Management> to "Use" before connecting to the
Web Viewer. (Page 43)

All settings are applied by the DVR's settings.
3. Click <Install ActiveX Control...>.
Downloading Active-X control may take several minutes
according to the security settings on your PC.
4. Click <Install>.
80_ web viewer