Table of Contents
Advertisement
using the DVR
Setting the PTZ
To use Camera's PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the "Remote Devices" settings. (Page 46)
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Camera>, and press [ENTER] button.
2. Select <PTZ>.
A window of PTZ settings appears.
3. Use direction buttons ( ◄ ►) to move to a desired
item, and select it.
• ID : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote control or front panel.
• Protocol : Set the protocol of the connected camera of each
channel.
M
You can check the camera's ID and protocol if you turn the camera off and on after connecting it to the DVR.
4. When the PTZ setup is done, press <OK>.
42_ using the DVR
Camera
PTZ
Camera
CH
ID
1
0
>
>
2
1
>
3
2
>
4
3
OK
Cancel
Protocol
None
None
None
None
- Quick Links:
- Connecting the Network
- System Setup
Hide quick links:
Advertisement
Table of Contents
