Updating The Software - Samsung SRD-830 User Manual

8/16 channel dvr
Hide thumbs Also See for SRD-830:
Table of Contents

Advertisement

• Updating the Software

1. Connect a device storing the software to be updated.
(It may take about 10 seconds to recognize the device.)
Upgradeable devices include USB memory, CD/DVD and
network device.
To update the network, the current DVR should have been
connected to the network.
Upgrade via the proxy server may not be enabled due to the
restricted access.
2. Select <System Management> from <System> window.
3. Select <System Information>.
4. When the recognized device appears, select <Upgrade>.
The <Upgrade> button will be activated only if the current <Software Version> of the <System Information> is
same to or older than that of <S/W Upgrade>.
5. Press <OK> in the "System Upgrade" window.
While updating, it shows the progress.
• Updating progresses with 3 steps as shown in the figure.
6. When the updating is done, it automatically restarts.
Do not turn the power off until it finishes restarting.
M
If "Upgrade Failed" appears, retry from the step 4.
When you experience continued failure, consult the service
center for assistance.
System Management
System Information
Settings
 System Information
 Software Version
v1.0xh_yymmddhhmmss
System Upgrade
 Broadcast Format
NTSC
 MAC Address
00:00:F0:54:FF:FF
Current Version
v1.0xh_yymmddhhmmss
New Version
v1.0xh_yymmddhhmmss
 S/W Upgrade
Do you want to upgrade?
 Device
USB2FlashStorage
Upgrade
OK
Cancel
 Version
v1.0xh_yymmddhhmmss
Previous
System Management
System Information
Settings
 System Information
 Software Version
v1.0xh_yymmddhhmmss
 Broadcast Format
S/W Upgrade
NTSC
 MAC Address
00:00:F0:54:FF:FF
Software upgrading...
 S/W Upgrade
 Device
USB2FlashStorage
Upgrade
 Version
v1.0xh_yymmddhhmmss
Previous
System Management
System Information
Settings
 System Information
 Software Version
v1.0xh_yymmddhhmmss
 Broadcast Format
S/W Upgrade
NTSC
 MAC Address
00:00:F0:54:FF:FF
Software upgrading...
 S/W Upgrade
Do not turn off during the upgrade.
 Device
USB2FlashStorage
Upgrade
 Version
v1.0xh_yymmddhhmmss
Previous
English _45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents