Recipient Setting - Samsung SRD-830 User Manual

using the DVR

Recipient Setting

You can add/remove a recipient(s) to/from the specified group and edit the group if necessary.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
( ) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <Recipient>.
3. Use direction buttons ( ◄ ►) to move to a desired item
and set the value.
• Add : You can select a recipient name, e-mail address or
group.
You should have created a group in the <Group> menu
item before you can add a user to the group.

For inputting the recipient name and email address, refer to
"Using Virtual Keyboard". (Page 40)
4. When the recipient setting is done, press <OK>.
SNMP
You can configure the settings for the SNMP protocol.
Using the mouse may help make setup easier.
1. From the <Network> setup window, use the  buttons
to move to <SNMP>. Then, press [ENTER].
The SNMP setup screen appears.
2. Use the four direction buttons ( ◄ ►) to move to a
desired item. Make your settings as necessary.
• Enable SNMP v1: SNMP version 1 will be active.
• Enable SNMP v2c: SNMP version 2 will be active.
- Read Community : Read community where you can
access objects that support the SNMP protocols.
- Write Community : Write community where you can
access objects that support the SNMP protocols.
3. When completing the SNMP settings, click <OK>.
70_ using the DVR
Mailing Service
SMTP Event Group
 Group All Group
Group Name e-Mail Address
OK Cancel
Mailing Service
SMTP Event Group
 Group ABC
Add recipient
Group Name e-Mail Address
 Name
 Email
 Select Group ABC
OK Cancel
OK Cancel
SNMP
Enable SNMP v1
Enable SNMP v2c
Read Community public
Write Community write
OK Cancel
Recipient
Add
Delete
Previous/Next Page
Recipient
Add
Delete
Previous/Next Page