Ezm Group & Area Arming Opt. (Addr 0737-0744) - NAPCO Gemini GEM-P1632 Programming Instructions Manual

EZM Group 1 EZM Group 2
ADDRESS 0737 ADDRESS 0738
LEFT RIGHT LEFT
blank blank
Default depends on Easy Menu Question "
is not enabled, then all 6 groups will be automatically enabled. If 32 zones are used and Zone Doubling is enabled, then only groups 1-4 will be automatically enabled.
NOTE: If "Zone Doubling" (Address 0721) is not enabled, then Zones 1-8 are included in the control panel and Zones 9-32 (Groups
1-6) are EZM Zones. If "Zone Doubling" is enabled, then Zones 1-16 are included in the control panel and Zones 17-32 (Groups 1-4)
are EZM Zones (and Groups 5 and 6 must not be used).
EZM TYPE
EZM
GROUP
DATA
1
ENTRIES OPTION
2
RIGHT
3
Not used
4
blank (•)
(No EZM
5
present)
6
1
4-Zone EZM
AREA ARMING OPTI ON S (ADD RESS 0743 & 0744)
Priority ADDRESS 0743
Arming
LEFT RIGHT
Area 1 blank (•)
[Default = blank (•) blank (•)]
PRIORITY ARMING/AREA 1
DATA ENTRIES OPTION
LEFT RIGHT
blank (•) blank (•) Not Used
blank (•) 1 Enabled
L
NAPCO Security Systems
EZM GROUP OP TIONS (A DDRES S 0737-0742)
EZM Group 3
ADDRESS 0739
RIGHT LEFT RIGHT
blank
# OF ZNS IN AREA 1 ENTER # ZONES
ZONES COVERED
EZM GROUP OPTIONS: Up to 6 Groups of 4 Zones each may be programmed
NORMAL DOUBLED
depending on the number of zones used and which EZM modules are connected.
9-12 17-20
Each group represents 4 zones.
13-16 21-24
17-20 25-28
!
1. Select EZM type from the table shown.
21-24 29-32
25-28
!
2. Enter in corresponding address locations above (right digit only).
29-32
NOTE: Dark shaded data value box shows option not available.
!
3. Press
Priority ADDRESS 0744
Arming
LEFT RIGHT
Area 2 blank (•)
[Default = blank (•) blank (•)]
PRIORITY ARMING/AREA 2
DATA ENTRIES OPTION
LEFT RIGHT
blank (•) blank (•) Not Used
blank (•) 1 Enabled
EZM Group 4
ADDRESS 0740
LEFT RIGHT
blank
EZ ZONE DOUBLING? Y/N
" and " ". For example, if 32 zones are used and Zone Doubling
U D
or to save.
PRIORITY AREA ARMING:
!
1. Select option from the table shown.
!
2. Enter in corresponding right digit address location (left
digit is not used).
NOTE: Dark shaded data value box shows option not available.
U D
!
3. Press or to save.
X
GEM-P1632 Programming Instructions
Page 33
EZM Group 5 EZM Group 6
ADDRESS 0741 ADDRESS 0742
LEFT RIGHT LEFT
blank blank
!
RIGHT