This function is used to set the speaker ON in order to monitor the dialing and connection portion of
every transmission. This function is mainly used to confirm dialing and phone line status.
1
Display the LINE MONITOR Menu.
Press:
then
2
Select the Line Monitor option.
• To turn OFF the monitor speaker, press
• To turn ON the monitor speaker, press
Temporary Line Monitor Change
Note
This temporary setting is only available when the default
setting is "Off".
1
Press the
key.
2
Place the original.
• For details on how to place the originals on the glass.
(
See page 2-8.)
3
Set the scanning conditions. (
2-15.)
4
Press the
key to display the COMM. OPTIONS.
5
To select "4. LINE MONITOR," press
6
Select "1.OFF" or "2.ON" to change the setting.
• To select "1.OFF," press
• To select "2.ON," press
7
Specify the remote FAX. (
2-21.)
Line Monitor
See pages 2-10 to
.
.
See pages 2-16 to
LINE MONITOR
1.OFF
2.ALWAYS
FAX SETUP
01.LINE MONITOR
.
02.RECEIVE INTERVAL
03.ECM
.
1.SECURITY TX
2.ECM
3.LONG ORIGINAL
4.LINE MONITOR
.
LINE MONITOR
1.OFF
2.ON
ENTER TEL NUMBER(MAX128):
FEB25-2001 11:30AM
RESOLUTION:STANDARD
4
:OFF
:ON
:OFF
:OFF
M :100%
:AUTO
COMM.OPTION
4-21