E-Studio20/25 - Toshiba e-studio 16 Operator's Manual

1. DESCRIPTION OF THE OPTIONAL EQUIPMENT (Cont.)
Automatic document feeder (MR-2012)
Reversing automatic document feeder (MR-3011)
Finisher including Transportation
bridge (MJ-1011)*
(e-STUDIO20/25 only)
Paper feed unit (MY-1015)
Large Capacity Feeder
(KD-1010)**
(e-STUDIO20/25 only)
* The Job separator (MJ-5001) or Offset tray (MJ-5002) can be installed in place of the Finisher.
** The Paper feed pedestal (KD-1009) can be installed in place of the Large capacity feeder (KD-1010).
Furthermore, the Cassette module (MY-1017) (option for e-STUDIO20/25) can be installed in
the KD-1009.
• Print Function with Job Separator (option) Attached
When the job separator is attached, received faxes are output onto the upper tray and copied sheets
are output on the lower tray. The job separator is convenient since copies and faxes can be output
separately.
• Print Function with Finisher (option for the e-STUDIO20/25) Attached
Even if the finisher is attached, received faxes are output onto the central output tray.
• Print Function with Stack Feed Bypass (option) Attached
Even though the stack feed bypass is attached, it cannot be used for receiving faxes.
1-4

e-STUDIO20/25

Stapler (KK-1600)
Automatic duplexing unit
(MD-0101)
Stack feed bypass
(MY-1016)