How To Answer A Call - Jabra GO 6470 User Manual

Calling through a Desk Phone
Figure 37: Placing a call with your headset and desk phone
to place a call through your desk phone:
1. If necessary, set the desk phone as the current target for your headset (see also Section 6.2: the target Phone
Concept.)
2. to get a dial tone:
If you are using a handset lifter or electronic-hookswitch:
Open the audio link to the headset by doing one of the following:
- tap the headset's multifunction button, or
- touch the call icon on the base touchscreen, or
- lift the headset from the cradle on the base (if automatic opening of the audio link is enabled, see Section
8.8: headset Docking-operation).
you should now hear a dial tone.
If you do not have a handset lifter or electronic-hookswitch:
- open the audio link in one of the ways described above for handset lifter or electronic hookswitch.
- lift your desk phone handset from the receiver, setting it aside — or press the headset button, if your desk
phone has one.
you should now hear a dial tone.
3. dial the number using your desk phone's buttons.
6.4

how to anSweR a call

Figure 38: Answering a call
Jabra GO 6470 User manUal
33