Jabra EXTREME2 - Bluetooth Headset Manual

THANK YOU

Thank you for purchasing the Jabra EXTREME2 Bluetooth® wireless technology headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset.

ABOUT YOUR JABRA EXTREME2

1. Answer/end button
2. On/off button
3. LED light
4. Charging socket
5. Volume up/volume down
6. Microphones
7. Earhook
8. Eargels

WHAT YOUR HEADSET DOES

Your Jabra EXTREME2 lets you do all this

• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Put call on hold*
• Mute
• Multiuse™ - being connected to two Bluetooth® devices at the same time
• Play music*

Specifications

• Talk time up to 5½ hours / standby time up to 10 days
• Multi-colored light for status and battery indicator
• Quiet mode – turns light off after one minute
• Size: L 48.3 x W 17.9 x H 23.4 mm (L 1.9 x W 0.7 x H 0.9 in)
• Weight: 10 grams (0.35 oz)
• Noise Blackout™ with dual microphones
• Digital sound enhancement via DSP technology
• Noise reduction on transmitted and received audio
• Noise dependent volume control*
• Automatic volume adjustment on receive audio
• Acoustic shock protection
• Qualified for Bluetooth® Specification version 3.0, supporting
• Headset and Hands-Free Profiles for phone conversations and Advanced Audio Distribution Profile (A2DP) for streaming music
• e-SCO for enhanced audio quality
• 128 bit encryption
• Operating range up to 10 meters (approx. 33 feet)

* Phone dependent

JABRA VOICE COMMANDS

JABRA VOICE GUIDANCE

The Jabra EXTREME2 is loaded with voice announcements that talks you through setup and daily operation. In the table below you can see the most common announcements

GETTING STARTED

You should follow three steps before using your headset

1. Charge your headset
2. A ctivate Bluetooth® on your mobile phone (refer to the manual for your Mobile phone)
3. Pair your headset to your mobile phone

The Jabra EXTREME2 is easy to operate. The answer/end button on the headset performs different functions depending on how long you press it.

CHARGE YOUR HEADSET

Make sure that your headset is fully charged before you start using it (duration app. 2 hours). Use the supplied USB cable to charge. When the light indicator (LED) has a solid light, your headset is charging. When the LED light is solid green and goes into quiet mode, your headset is fully charged.

Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.

TURNING YOUR HEADSET ON AND OFF

• Slide the on/off button forward on the side of the headset to turn on the headset. The LED will flash green for a second when the headset is on.
• Slide the on/off button backward to turn off the headset

PAIRING IT WITH YOUR PHONE

Headsets are connected to phones using a procedure called 'pairing'. By following a few simple steps, a phone can be paired with a headset in a matter of minutes.

As described in the section JABRA VOICE GUIDANCE above the pairing process is supported by voice prompts.

1. Put the headset in pairing mode
   • When you turn on your Jabra EXTREME2 for the first time, the headset will automatically start up in pairing mode – i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is flashing blue.
2. Set your Bluetooth® phone to 'discover' the Jabra EXTREME2
   • Follow your phone's instruction guide. First make sure that Bluetooth® is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a 'setup,' 'connect' or 'Bluetooth®' menu on your phone and selecting the option to 'discover' or 'add' a Bluetooth® device.*
3. Your phone will find the Jabra EXTREME2
   • Your phone will find the headset under name "Jabra EXTREME2". Your phone then asks if you want to pair with the headset. Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete.

In case of unsuccessful pairing, put the Jabra EXTREME2 into pairing mode manually. Make sure the headset is on. Press and hold the answer/end button for approximately 5 seconds until the LED is flashing blue.

WEARING STYLE

The Jabra EXTREME2 is ready to be worn with or without the ear hook. The ear hook can be removed and the headset can be used with the Ultimate-Comfort Eargels^TM .

The Ultimate-Comfort Eargels^TM can be used for both left and right wearing.

The Ultimate-Comfort Eargels^TM come in two different styles to fit any ear.

You can also twist the eargel slightly to optimize the fit and comfort.

For optimal performance, wear the Jabra EXTREME2 and your mobile phone on the same side of your body or within line of sight. You will get better performance when there are no obstructions between your headset and your mobile phone.

HOW TO

Answer a call

• Tap the answer/end button on your headset to answer a call, or say 'Answer'.

End a call

• Tap the answer/end button to end an active call.

Reject a call*

• Press the answer/end button when the phone rings to reject an incoming call, or say 'Ignore'. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or will hear a busy signal.

Make a call

• When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not allow this feature, tap on the Jabra EXTREME2's answer/end button to transfer the call to the headset.

Activate voice dialing

• Press the answer/end button. For best results, record the voice dialing tag through your headset. Please consult user manual of your phone for more information about using this feature.

Redial last number

• Double tap the answer/end button when the headset is on and not used.

Adjust sound and volume

• Tap the volume up or down to adjust the volume.

Mute/un-mute

• To mute, press both volume up and down at the same time. A low beep alert plays during a muted call.
• To un-mute, tap either of the volume buttons.

Call waiting and placing a call on hold

• This lets you put a call on hold during a conversation and answer a waiting call.
• Press the answer/end button once to put the active call on hold and answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.

Battery indicator

• Tap one of the volume buttons to see the battery level.

Using you Jabra EXTREME2 with two mobile devices at the same time

The Jabra EXTREME2 supports Advanced MultiUse™ and is capable of having two mobile phones (or other Bluetooth® devices) connected at the same time. This will give you the freedom of having only one headset to operate both of your mobile phones/devices.

When you have two active phones/devices connected you will hear "Two devices connected". In this state the phone paired last will be used for voice dialing. When two phones are connected you can place and answer calls on both and switch between the two. If you are on a call and receive a second call you will be alerted by a tone. You can then:

• Put the first call on hold and accept the incoming call by pressing the Answer/end button
• Switch between the two active calls by pressing the Answer/ end button again
• T ap the Answer/end button once to end the first call and accept the new incoming call
• Reject the incoming call
  Double tap the Answer/end button on your headset

WHAT THE LIGHTS MEAN

LISTENING TO MUSIC USING THE JABRA EXTREME2

Jabra EXTREME2 is capable of streaming music over Bluetooth® - either from a mobile phone or any other Bluetooth® device supporting A2DP. Once you have paired your Jabra EXTREME2 with your mobile phone or with a Bluetooth® music player, use your phone or music player to play, pause, stop, skip, forward and backward. When you receive a call, the music will automatically be suspended and you will be able to answer or reject a call through the headset. Once you end a call, the music should recommence. On some phones and music devices you may have to press 'play' to start the music again.

TAKING CARE OF YOUR HEADSET

• Always store the Jabra EXTREME2 with the power off and safely protected.
• Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.
• Do not expose the Jabra EXTREME2 to rain or other liquids.

GLOSSARY

1. Bluetooth® is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 10 meters/33 feet). Bluetooth® is safe to use. It is secure too, so once a connection has been made no-one can listen in and there is no interference from other Bluetooth® devices either. Get more information at www.bluetooth.com.
2. Bluetooth® profiles are the different ways that Bluetooth® devices communicate with other devices. Bluetooth® phones support the headset profile, the hands-free profile or both. In order to support a certain profile, a phone manufacturer must implement certain mandatory features within the phone's software.
3. Pairing creates a unique and encrypted link between two Bluetooth® devices and lets them communicate with each other. Bluetooth® devices will not work if the devices have not been paired.
4. Passkey or PIN is a code that you enter on your Bluetooth® enabled device (e.g. a mobile phone) to pair it with your Jabra EXTREME2. This makes your device and the Jabra EXTREME2 recognize each other and automatically work together. The passkey for all Jabra products is 0000.
5. Standby mode is when the Jabra EXTREME2 is passively waiting for a call. When you 'end' a call on your mobile phone, the headset goes into standby mode.

Dispose of the product according to local standards and regulations.

www.jabra.com/weee