Page 1
“phone” symbol and the RJ45 plug into the socket marked with "AUX". Then follow the instructions of the Jabra Pro 9400 / Jabra Go 6470 base SmartSetup Wizard. Select phone settings, "Desk phone", then "Connect to a desk phone?”, "Manual".
Page 2
Microphone volume setting: We recommend setting the microphone volume to 6 out of 13. Guided set-up: As part of the installation you can dial into the local Jabra Setup server that takes care of configuring the audio path. Please follow the https://www.jabra.com/supportpages/jabra-pro-9465/9465-69-804-...
Page 3
21/12/2023 20:58 instructions shown on the display. If your Jabra Setup server is unavailable, please contact your local Jabra Support team. Phone setup: Important: For the equipment software 3.18 the headset operation must be set up additionally on the phone.