Jabra GO 6470 User Manual page 23

Connecting to the GN1000 Remote Handset Lifter
a remote handset lifter gives you remote call control with a Jabra GO headset up to 100 m away from your desk.
It lets you answer calls, end calls and transfer ring tones to the headset.
the Gn1000 remote handset lifter is an accessory available from Jabra. It is a motorized device that physically
lifts the handset when you use controls of your Jabra GO base or headset. you can use the handset lifter with
nearly any type of desk phone — including phones that also happen to have electronic-hookswitch support.
Figure 16: Connecting to a GN1000 Remote handset lifter
to connect the Jabra GO base to a Gn1000 rhl handset lifter, follow the instructions in the desk phone setup
wizard, as given below:
SELECT
Electronic hookswitch
adapter
Jabra GN1000
Figure 17: Select Jabra GN1000
CONNECT TO BASE
Figure 19: Connect as shown here
1. when you
reach the
touchscreen
Unplug handset cable
shown left,
select Jabra
GN1000:
Figure 18: unplug handset cable
3. In the (first)
CONNECT TO BASE
CONNECT TO
BASE screen,
shown left,
connect the
handset as
shown.
Figure 20: Connect as shown here
Jabra GO 6470 User manUal
CONNECT
2. In the first
CONNECT
screen, shown
left, unplug
handset cable.
4. In the (second)
CONNECT TO
BASE screen,
shown left, con-
nect the cable
with the blue
marking to the
base port, as
indicated in the
wizard.
23