Audio On-Hold - Jabra GO 6470 User Manual

9.3

audio on-hold

If you initiate an outgoing call while you are on a call on another phone, the current call is automatically put on
audio-hold. It remains on audio-hold even after the new call is ended — you need to manually re-activate the call
to resume it.
you can put active calls on audio-hold as described in this section.
Consider the figures below:
Figure 70: Displaying the phone
menu.
as another example, consider the figures below:
Figure 72: You have two calls; one
active and one on audio-hold.
1. you have only
one current
call — on your
mobile phone.
you decide that
you want to take
a break; touch
the mobile
phone icon
to display the
Mobile Phone
menu, as shown
(see the section
"Phone menu"
for more). select
audio on-hold
(microphone
Figure 71: the target call is put on
and speaker
audio-hold.
icons).
1. you have an
active call on
your softphone
and a desk
phone call on
audio-hold, as
shown.
Figure 73: the active call is put on
audio-hold when the new call is
accepted.
Jabra GO 6470 User manUal
2. now the mobile
phone call is
on audio-hold
(yellow handset)
but still in the
foreground on
the touchscreen,
as shown. the
audio link is to
the headset is
broken.
to restore the
audio link and
resume the call,
touch the yellow
play button
underneath the
phone icon or
touch the phone
icon itself.
2. a third call
comes in on
your mobile
phone. you
decide to touch
the green
handset icon at
the bottom of
the screen to
accept this call.
now the desk
phone and
softphone calls
are on audio-
hold (yellow
handsets) and in
the background.
the mobile
phone call is
now active, as
shown.
61