JUKI DDL-5550N Handbook page 72

SPECIFICATIONS
Without
automatic LZ-2280N
thread trimmer
Model
name
With
automatic
thread trimmer
Stitch system Standard zigzag
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. feeding amount
Min. cutting allowance
of lower knife
Lower knife driving
method
Lift of the presser foot By hand: 5.5mm, By knee: 10.0mm
Hook
Thread take-up
Lubrication
Lubricating oil
Needle
(at the time of delivery)
Needle position
changing mechanism
Reverse feed stitching
mechanism
Needle throw direction
change-over mechanism
Needle throw pattern
cam
Number of pattern cams
specified
LZ-2288N: Selectable from five different cams; Standard zigzag stitching cam, 3-step zigzag stitching cam, 2-step zigzag stitching cam,
● Anti-material-slip type
Without
automatic LZ-2280NU
thread trimmer
Model
name
With
automatic
thread trimmer
Stitch system
Max. sewing speed
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003)
LZ-2281N
Standard wider Standard zigzag
zigzag
5,500rpm
5.0mm (A type)
5.0mm
8.0mm (B type)
2.5mm (A type)
2.5mm
5.0mm (B type)
By hand: 4.0mm
SCHMETZ 438SUK (Nm75), ORGAN DP 5 (#10)
Triangular cam
standard scalloping cam, crescent scalloping cam. Other cams are optionally available.
LZ-2284NU
LZ-2284NU-7
4,500rpm
LZ-2282N LZ-2284N
LZ-2282N-7 LZ-2284N-7
Standard/
(with lower knife) 3-step zigzag
5,000rpm
5.0mm (standard)
4.5mm
10.0mm (3-step)
2.5mm (standard)
2.5mm
2.0mm (3-step)
3.0mm
AC motor
By hand: 5.5mm, By knee: 10.0mm
By knee: 8.5mm
DP hook (with titanium-treated inner hook)
Rotary type
Fully automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Provided as standard
Provided as standard
LZ-2286N LZ-2288N
With changeable
3-step zigzag
pattern cams
Refer to the
specifications
for pattern cam
8.0mm
10.0mm
(standard: 6.0mm)
2.0mm 2.5mm
Provided as
standard
Grooved cam
11
2/6
LZ-2285N
Fagoting
4,000rpm
8.0mm
2.2mm
By hand: 5.5mm
By knee: 8.0mm
SCHMETZ
438SUK (#80)