JUKI DDL-5550N Handbook page 189

Automatic Serging Machine
ASN-697
(High-grade type)
ASN-695
(Standard type)
● The ASN Series machine has been provided with the capability
of sewing light-weight materials, and a low-tension sewing
feature to enable sewing according to the material to be sewn,
as well as achieving consistent high-quality seams free from
slip-off seams at curved parts of the material.
● The machine offers high-speed performance with its maximum
sewing speed of 8,000rpm.
makes the most out of its original capabilities as a serging
machine to help dramatically increase productivity.
● The machine is fully equipped with mechanisms developed
through a full consideration for seam quality.
therefore, supports any type of material.
● The machine can be adjusted externally according to the
material to be sewn.
● The ASN-697 is provided as standard with a cloth control
device, curl blower, in-curve and out-curve detecting sensor,
cloth feed table air blower, as well as other helpful
mechanisms. When the machine sews crotches or joins the
seat seams of slacks, the in-curve and out-curve detecting
sensor detects sharp in-curves and out-curves to automatically
control the sewing speed.
Automatic shirring is also possible at desired sections of the
material by programming sewing data.
an air-driven feed mechanism for feeding materials while
preventing the material from slipping off the needle entry
point.
WHEN YOU PLACE ORDERS
ASN697
ASN695
Overedging Power supply
width (mm) Code
For General Single-phase 220 240V
4.0 AA
Export
3-phase
4.8 AB
For CE Single-phase 220 240V
5.6 AC
Stacker, pedal, differential feed mechanism, cloth feeding device and table air blower
Stacker Pedal
Stacker Differential 2-pedal
SS40 SS42
feed
2-pedal unit: Stacker pedal Differential feed pedal
With this feature, the machine
The machine,
The machine adopts
Code Auxiliary table Code
07 Not provided
200 220V 11 Provided
34
Differential Air blower Cloth feeding
feed device
Silencer Code
Z Not provided Z
A Provided A
Stacker, pedal, differential feed mechanism, cloth feeding device and table air blower
Stacker
Code
device
SS40 SS42
Z
A
B
C
D
E
H
M
N
Differential feed device and table air blower is equipped as standard with the machine
P 2-pedal unit: Stacker pedal +Differential feed pedal
Cloth control Cloth receiving
Cord
device board
Not provided Z Not provided
Provided A Provided
Pedal
Cloth feeding
Stacker Differential 2-pedal
device
feed
ASN-697, ASN-695 (September, 2003) 1/2
ASN-697
13
Cord
Z
A
Code
Z
A
B
C
D
E
M
N