JUKI DDL-5550N Handbook page 182

NEWLY DEVELOPED DEVICES (OPTIONAL)
Since optional parts can't be retrofitted to the machine after purchase, be sure to specify any that you may need when placing your order.
Model Description
SA102 Welting patch cutting device
SA103 Automatic flap feeder
Automatic flap and pocket
SA104
bag feeder
Automatic pocket bag feeder
SA105
(right)
OPTIONS
The same optional parts are offered for the APW-297 and APW-298. They can be retrofitted to either machine.
Model Part No.
SA73N GSA-730000A0B Auxiliary receiving plate (right)
SA106 GSA-106000A0 Dart stretcher
SA107 GSA-107000A0 Automatic pocket bag presser
SA109 GSA-109000A0 Automatic interlining feeder
SA110 GSA-110000A0 Stand for standing work
Right single-welt and double-
SA111 GSA-111000A0
welt changeover device
SA112 GSA-112000A0 Shim device
SA115 GSA-115000A0 Automatic interlining presser
SA116 GSA-116000A0 Table for vacuum type
SA108 GSA-108000A0 Suction device
SA91 GSA-910000A0 Suction motor
SP44 Clamp bar stacker
SP45 Roller stacker
APW-297, 297B, 298 (September, 2003) 4/4
• The knife is motor-driven. To cut the welting patch as short as possible, it automatically adjusts itself to the
sewing length established on the operation panel. This enables more consistent welting patch feed and folding
operations.
• The welting patch cutting knife is located under the welting patch table. This keeps the knife from damaging the
garment body. In addition, the knife can be changed with ease.
• Welting patch cutting, a job conventionally done by hand in the after-process, is no longer required. The result is
a substantial reduction in the processing time.
• The clamp exclusively used during welting patches cutting allows the cutting device to cut welting patches even
when the binder is in the lower position. This further eliminates wasted time due to welting patch cutting.
• The fulcrum at the center of the automatic flap feeder claw clamps flaps securely and automatically feeds them to
the sewing position. This promises increased productivity.
• The device works to sew the flap and pocket bag at the same time with the pocket bag placed on the flap.
• Simultaneous sewing of a flap and pocket bag produces beautifully finished welts free from uneven material feed.
In addition, there's no longer any need to attach the pocket bag on the flap side, a task normally required in the
after process.
• This device is intended to be used with SA104 (automatic flap and pocket bag feeder) to automatically sew pocket
bags on both sides of a welting patch.
Description
This is the receiving plate for accessories for welting patches, etc.
The dart stretcher holds the end of the material when making a welt on a darted part of the
material to make it easier to set the darted part and improve the reliability of the welting.
The automatic pocket bag presser is used to hold pocket bags under the garment body when
welting and pocket bag sewing are performed concurrently.
To improve workability, the automatic interlining feeder automatically delivers rolled interlining
cloth onto the table and cuts it.
This stand is mounted under the main body of the machine to adjust the height of the main
body to standing work.
The device opens/closes the clamp foot by fingertip control. This enables easy changeover of
the sewing machine specification between double-welt and right-single-welt types simply by
changing the binder.
This device encloses a garment body between its upper and lower parts and feeds it to the
needle entry area. It is especially useful for difficult-to-feed garment bodies.
This device is used for securing interlining under garment body for sewing.
The device picks up the garment body by suction force to facilitate setting of materials on the
machine. Use the device with a suction motor (SA91).
This is the blower motor for the suction device (SA108).
Since the main body of the stacker swings around to catch a material, even smaller garment
bodies can be consistently stacked (350 mm from the pocket position at the minimum).
Stacked garment bodies are secured with the bar.
This prevents a stacked garment body from slipping down.
This is a stacker suited for small articles that cannot be feed by a bar stacker or grasping stacker.
Feature
Feature