JUKI DDL-5550N Handbook page 149

Pinpoint Saddle Stitching Machine
MP-200N
● In addition to balloon-stitching (to produce seams with a hand-stitched touch),
smooth sewing of chain-off stitches, and having other outstanding seam
quality features of the highly regarded Columbia 100, the MP-200N achieves
more improved sewing capabilities and a wider adjustment range.
● The machine comes with a box type feed that permits a split adjustment in
both horizontal and vertical directions, thereby responding to the sewing of
various types of materials. Additionally, the inclination of the feed dog is also
adjustable in accordance to the material.
● Needle gauges support, using replacement parts, stitch widths from as narrow
as 1.2mm to as wide as 5.0mm.
● The applicable range of yarn counts has been widened from #60 to #8 (B33,
Nm = 120/3) for both Tetron and spun thread.
used for topstitching a wider range of items.
SPECIFICATIONS
Model name
Max. sewing speed
Pinpoint stitch width (needle gauge)
Length of thread that appears on the
right side of sewing product (reference)
Feed pitch
Recommended feed pitch
Applicable range of gauges
Needle
Hook-needle
Needle
(at the time Recommended thread
of delivery)
Recommended yarn count
Recommended material/process
Lift of the presser foot
Split adjustment of feed
(vertical/horizontal direction)
Lubrication
Lubricating oil
WHEN YOU PLACE ORDERS
MP200N
Needle gauge Code
1.6mm
5.0mm
USES OF PINPOINT STITCHING
●Men's coats and jackets
qTopstitching on the front facing
wBlind edge stitch at the far side of the front
facing, and blind edge stitch on the front body
(for preventing uneven material feed)
qTopstitching
wBlind edge stitch at
the far side of the
front facing
wBlind edge stitch on
the front body
This allows the machine to be
MP-200NS
2,000rpm (feed pitch 6mm or less)
1,500rpm (feed pitch 6 8mm)
1,200rpm (feed pitch 8 10mm)
1.6mm
(2.0mm: Spacer is required to be changed
with the one supplied with the machine)
1.1mm
3.5 10mm
3.5 10mm (feed pitch that is larger than double of needle gauge is recommended)
1.2 2.5mm
(for 1.2 and 2.5mm, optional parts are required)
SCHMETZ 29C150 (Nm90) Nm80 Nm140
SCHMETZ 29C151 (Nm100) Nm80 Nm140
Tetron Spun
#60 #30, B33 B46, Nm=120/3 60/3
Wool, lining/ facing-topstitching process
Model name
MP-200NS
(Needle gauge
1.6mm)
S
L
MP-200NL
(Needle gauge
5.0mm)
Refer to "Replaceable parts of gauges" for a correspondence between gauges and needle gauges.
●Trousers
qTopstitching on the front pocket
mouths and left top-center plait
wSide topstitching
qTopstitching on the
front pocket mouths
10mm (For the needle gauge of 5mm)
(for 3 and 4mm, optional parts are required)
ORGAN CP 1J (#22U) #18U #22U
ORGAN CP 12J (#23) #19 #30
#30 #8, B46 B92, Nm=60/3 30/3
Flannel/ topstitching peripheries of collars and pockets
By hand: 5.5mm/By knee: 10.5mm
Possible
By an oiler
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
WIDER RANGE OF APPLICABLE NEEDLE GAUGES
AND YARN COUNTS
Needle
gauge
1.2mm Option
1.6mm Provided as standard
To be replaced with the needle
2.0mm clamp spacer supplied
with the machine
2.5mm Option
3.0mm Option
4.0mm Option
5.0mm Provided as standard
●Miscellaneous
qTopstitching on collars of coats,
ladies' cut and sewn garments, knit
shirts, etc.
wTopstitching on the top-
center plaits of coats,
qTopstitching on the
ladies' wear, shirts,
left top-center plait
etc.
eVarious kinds of
topstitching on
coats, ladies'
wear, shirts, etc.
wSide topstitching
MP-200NL
MP-200NL
1,500rpm (feed pitch 6 8mm)
1,200rpm (feed pitch 8 10mm)
5.0mm
4.5mm
3.0 5.0mm
Tetron Spun
Applicable yarn
Gauge
count
Tetron, Spun
#60~#30,
B33~B46,
Nm=120/3~60/3
Tetron, Spun
#30~#8,
B46~B92,
Nm=60/3~30/3
q
e
MP-200N (September, 2003) 1/2
10
w