JUKI DDL-5550N Handbook page 204

WHEN YOU PLACE ORDERS
DDL5600N
Application
For jeans
For heavy materials
For leather shoes
(with roller presser foot)
● PSC box
PSC box
For JUS(LA) Single-phase
For JUS , General Export 3-phase
For General Export Single-phase
For EU (CE) Single-phase
For China Single-phase
JUS: North America and Central and South America.
● Operation panel
Operation panel Code
IP-100C IP100C
CP-160A CP160A
OPTIONS
Model Part No.
AK85 Auto-lifter
Remaining bobbin
AE-5 GAE-050000A0
thread detector
ED-2 Material edge sensor
112-43763 Micro-lifter (asm.)
To retrofit the AE-5 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.
Remaining bobbin thread detector (AE-5)
DDL-5600, 5600N-7 (September, 2003) 2/2
DDL5600N
Code Wiper and automatic reverse feed function
J
Wiper
L
Not provided
R
Provided
(for DDL-5600NJ-7)
SC910
100 120V PFL
200 240V PFL
200 240V PFL
200 240V PFL
200 240V PFL
Description
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn
the operator not to press on the front part of the foot pedal. With this function, the operator
doesn't have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates
the thread trimmer. This enhances productivity by allowing the operator to conduct sewing
work without running to look out for missing stitches.
This device can be installed on the back of the faceplate. It is very convenient for frequent use.
7
Automatic reverse
Code
feed function
Provided
Provided
Code Control box
S Standard
D Provided with built-in I/O board
● Control box provided with built in I/O board
K
(Code A) should be selected for the machine
N
head equipped with the remaining bobbin
thread detector (AE-5).
U
Feature
Material edge sensor (ED-2)
Auto-lifter (optional)
Not provided
Provided (AK85)
0B
FB
● Motor for SC
M91S
Code Pulley belt
S Standard
A
Code
AK
Code
S