JUKI DDL-5550N Handbook page 159

Computer-controlled Cycle Machine with Input Function
for Extra Heavy-weight materials
AMS-210DHL6300SZ
● Based on AMS-210D, the model that provides upgraded sewing
capabilities and operability, AMS-210DHL6300 has been specifically
developed as a computer-controlled cycle machine for seat belts.
The machine has a sewing area of 60mm in length and 130mm in
width, and is provided with a slide thread take-up lever that
adequately tenses thick thread at all times, thereby ensuring the
upgraded sewing capabilities required of a sewing machine for extra
heavy-weight materials.
●
With its maximum sewing speed of 2,000rpm ( at a stitch length of
4mm or less) and increased jump speed, the machine demonstrates
higher productivity. The machine is provided with many different
features to achieve increased productivity throughout the entire
sewing work, including one-touch simple access to sewing patterns,
accurate positioning of the material by a separately driven pneumatic
feeding frame, easier placement of the material by an increased lift of
the feeding frame (max. 30mm), and reduced frequency of bobbin-
thread-replacement by adopting a double-capacity shuttle hook.
If the stitch length exceed 4mm, the machine will run at a speed
equivalent to the standard sewing speed of the AMS-210D.
●
The machine also provides helpful features for enhanced work comfort
such as needle bar up-position-stop function to allow the needle bar
to stop at its highest dead point and a direct-drive system that ensures
outstanding responsiveness and reduced vibration and noise.
SPECIFICATIONS
Model name
Sewing area
Max. sewing speed
Stitch length
Needle bar stroke
Lift of the feeding frame
Lift of the intermediate presser
Stroke of intermediate presser
Needle (at the time of delivery)
Hook
Treard take-up
Memory medium
Number of stitches that
can be stored in memory
Number of patterns that
can be input
Enlarging/Reducing facility
Bobbin thread counter
Sewing machine motor
Power consumption
Lubrication
Lubricating oil
Compressed air and
air consumption
Total weight
Dimensions
Sewing area: 60mm(L) 130mm(W)
2,000rpm (when stitch length is 4mm or less)
2DD/2HD 3.5" micro-floppy disk
Max. 360,000 stitches (max. 20,000 stitches/pattern)
Max. 691 patterns (2DD)/999 patterns (2HD)
1 400% (0.1% step), by increasing/decreasing the stitch length or the number of stitches
400W compact AC servomotor (direct-drive type)
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
0.5 0.55MPa (5 5.5kgf/cm
710mm (L) 1,200mm (W) 1,200mm (H)
AMS-210DHL6300SZ
60mm (L) 130mm (W)
0.1 12.7mm
41.2mm
Max. 30mm
20mm
Standard 4mm (0.5 10mm)
DP 17 (#25)#22 #26
Double-capacity shuttle hook
Slide style
Provided as standard
Single-phase, 3-phase 600VA
Automatic
2
), 1.8N /min
120kg
AMS-210DHL6300SZ (September, 2003) 1/2
AMS-210DHL6300SZ
11