JUKI DDL-5550N Handbook page 117

WHEN YOU PLACE ORDERS
● Machine head
LK1903ASS
Application Code
Standard S For extra-small, small button 301
For medium-size button
Work clamp foot Code
Standard S
● Machine head
LK1903ASS
Application Code
Standard S For small button
For medium-size button
Work clamp foot Code
Standard S
OPERATION PANEL
● Functional settings, such as pattern numbers and needle thread tensions can be
established through the operation panel with ease.
can be easily changed by means of pattern enlargement/reduction feature.
● Standard sewing patterns can be assigned to pattern keys P1 to P50.
patterns assigned to the P1 to P25 pattern keys can be activated with a touch of the
corresponding key. This means that workability is improved by assigning 25 sewing
patterns that are most frequently used to those pattern keys.
● As many as 20 different cycle sewing patterns, each of which combines a maximum of 30
different sewing patterns, can be stored in the memory.
● The operation panel has been installed at an angle and can be placed at the top, bottom,
right or left part of the table according to the operator's preference.
● A large color LCD touch panel has been adopted for the display.
It gives clear displays that allow the operator to understand operating procedures.
● The IP-200B panel can be connected to a personal computer and can store data on
SmartMedia. This allows data to be exchanged or shared among sewing machines
installed in a factory or among remote factories.
● The IP-200B panel has been provided
with a process improvement supporting
feature through the indication of the
operational state of the sewing machine,
and a maintenance and management
feature for indicating the needle
changing timing and cleaning timing.
LK-1903A, LK-1903A/BR35 (September, 2003) 4/4
Button clamp jaw lever Code
302
/BR35
Button clamp jaw lever Code
311
312
Feed plate
For small button
(standard: 16mm)
For medium-size button
(22mm)
(You can choose operation panel.)
STANDARD PANEL
Distance between holes in a button
● Control box
MC596
Power supply
3-phase 200
200
CE 200
Single-phase
(not provided with
power switch)
S
Power supply
115V
220V
Single-phase 240V
Code CE 230V
(not provided
S
with power switch
3-phase 220V
M
Any of the sewing
IP-200B
LK-1903A-SS/Installation of the IP-200B
Code Operation panel
240V E Standard panel
240V K IP-200B
240V
N
Code Operation panel
C Standard panel
D
IP-200B cannot be installed.
E
G
K
Code
SS
PB
Code
S