Editing; Tape Dubbing (From Vcr To Dvd) - JVC SR MV45U Instructions Manual

EDITING

46
EN

Tape Dubbing (From VCR To DVD)

Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
8
REC MODE
NOTES:
The superimposed indication during the operation or dubbing is not
recorded.
It is not possible to dub a tape with a copy protection signal.
If the recording capacity of disc become full, the tape stops
automatically.
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
If the index code is found on a tape, a single title is created. While
creating a title, the dubbing stops and then starts again.
When dubbing can not be performed properly, set "BLUE BACK" to
"OFF". ( pg. 61)
Dubbing An Entire Cassette
1
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press rt to select "COPY SET",
then press ENTER.
4
Press rt to select "FULL DISC",
then press ENTER to select "OFF".
Pressing ENTER toggles the setting
between on and off.
5
Press SET UP to complete the
setting.
VCR/DVD REC MODE
DUBB. Lamp
8
1 2 3
4 5 6
7 8 9
0
MAIN MENU
COPY SET
FUNCTION SET
PRESS ( , ), THEN (OK)
(SET UP) TO END
COPY SET
COPY MODE
FULL DISC
AUTO FINALIZE
( , ) THEN (ENTER)
(SET UP) TO END
6
Load a cassette you want to dub on the VCR deck, and a
recordable disc on the DVD deck.
7
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
8
Press REC MODE repeatedly to set the recording mode.
( pg. 36)
9
Press VCR]DVD to select the dubbing direction.The dubbing
(DUBB.) lamp lights up on the unit.
10
Press and hold DUBB. for more than 2 seconds to start
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
VCR ] DVD
When dubbing a tape-end recorded VHS tape, set the input of this
unit to a no signal input before dubbing.
If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
begins automatically.
After dubbing is completed, the VCR deck rewinds the tape
automatically.
lamp.
To stop dubbing, press 8.
DUBB.
Dubbing An Entire Cassette with Just Dubbing
When using the Just Dubbing function, the unit automatically fast-
forwards the tape to the end, then rewinds back to the beginning to
calculate the total recording time. The unit then automatically sets
the appropriate recording mode depending on the total recording
time and the available disc space.
1
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
2
Perform steps 2 – 3 of "Dubbing An Entire Cassette" in the left
column before continuing.
3
Press rt to select "FULL DISC", then press ENTER to select
"ON".
4
Press SET UP to complete the setting.
5
Load a cassette you want to dub on the VCR deck, and a
recordable disc on the DVD deck.
6
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
7
Press VCR]DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit
8
Press and hold DUBB. for more than 2 seconds to start
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
When dubbing a tape-end recorded VHS tape, set the input of this
unit to a no signal input before dubbing.
After dubbing is completed, the VCR deck rewinds the tape
automatically.
lamp.
To stop dubbing, press 8.
Auto Finalizing
When dubbing to a DVD-R/RW (Video mode) disc, you can
select whether to finalize the disc automatically after dubbing
has been completed.
To automatically finalize the disc after dubbing:
A Perform steps 1 – 3 of "Dubbing An Entire Cassette" in the
left column before continuing.
B Press rt to select "AUTO FINALIZE", then press ENTER to
select "ON".
C Press SET UP to complete the setting.
NOTE:
It is possible to set the operation method of a DVD-R/RW (Video
mode) disc when finalizing the disc. Each time the finalized disc is
played back, it will be played back in accordance to the setting you
have selected during finalization. For details, refer to "Finalize A
DVD-R/RW Disc" (
FULL COPY
OFF
OFF
Press to turn off the dubbing (
VCR]DVD
Press to turn off the dubbing (
VCR]DVD
pg. 63).
)
DUBB.
)
DUBB.