Operations On Dvd Deck; Basic Playback - JVC SR MV45U Instructions Manual

OPERATIONS ON DVD DECK

20
EN

Basic Playback

Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
ENTER
8
ATTENTION:
It takes approximately 30 seconds to read a disc depending on the
type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take
several minutes when a disc is dirty, scratched or warped.
It may take a few seconds to start playback. This is not a
malfunction.
Forward/reverse high-speed search and other operations cannot
be performed while playback is stopped.
VCR/DVD
x
DVD Lamp
8 4 9
1 2 3
4 5 6
7 8 9
0
4
SELECT
9
To play back an MP3/JPEG disc, see "Playback With MP3/JPEG
Navigation" ( pg. 45).
1
Load a disc.
For details, refer to "Placing A Disc" (
Playback begins automatically if an auto-playback DVD disc is
loaded.
Pressing 4 also closes the disc tray, and playback begins
automatically.
2
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3
Press 4 to start playback.
If you load a DVD disc whose region code does not match the unit,
"REGION CODE ERROR CHECK DISC" appears on the TV screen.
For details, refer to "Region Number" (
If "CAN NOT PLAY BACK DISC UNDER CURRENT SETTING"
appears on the TV screen, refer to "Parental Lock" (
With Video CD discs with PBC control or some DVD discs, the menu
display may appear on the TV screen after starting playback. In this
case, select an item which you want to play back from the menu.
Otherwise, the playback cannot go forward. Refer to "Playback
Control (PBC) Function" (
Using The DVD Menu" (
The Library Database DVD Navi also enables you to search and
select the desired programs. (
4
Press 9 to pause playback.
To resume normal playback, press 4.
5
Press 8 to stop playback.
When a recordable disc is played, playback stops and AV input (from
external AV source) resumes on the TV screen.
When a playback-only disc is played, playback stops and the still
image at the time you press 8 remains on the TV screen. Pressing 8
again resumes the AV input (from external AV source).
If x (EJECT) is pressed during playback, playback stops, then the
disc tray opens.
NOTE:
When the Library Database DVD Navi screen appears, choose a
thumbnail image of the desired program on the TV screen, then press
SELECT(4). ( pg. 40)
pg. 10).
pg. 8).
pg. 32).
pg. 24) or "Locating A Desired Scene
pg. 21).
pg. 40)