Finalize A Disc (Dvd Deck Only) - JVC SR MV45U Instructions Manual

Finalize A Disc (DVD Deck Only)

Finalizing DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalized in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Titles input in the Library Database DVD Navi are registered as
titles in the DVD menu. (
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
Load a DVD-R/RW disc to finalize.
VCR/DVD
FINALIZE
ENTER
SET UP
Before finalizing
It is possible to record on a blank space.
It is possible to enter a program title. (
It is possible to delete programs. (
It is impossible to overwrite recorded areas of DVD-R discs.
Available recording capacity does not increase even if a recorded
program is deleted from a DVD-R disc.
It is impossible to record or edit DVD-R/RW discs recorded on other
devices even if they have not been finalized.
After finalizing (For DVD-R/RW (Video mode) discs)
Video and audio that have been recorded by then are recorded in
conformity to the DVD Video standard, enabling you to play back the
discs as DVD VIDEO discs.
Although DVD-R/RW discs finalized on this unit become playable on
DVD players compatible with DVD-R/RW discs, some discs still may
not play, for which JVC cannot take responsibility.
Marked points marked before finalizing will be deleted, and programs
will be divided automatically into "chapters" approximately every 5
minutes. ( pg. 22)
Depending on the DVD players and DVD-R/RW discs used, and on
the conditions of recording, it may not be possible to play back the
discs. In this case, play back the discs on this unit.
Additional recordings become impossible.
pg. 41)
1 2 3
4 5 6
8
7 9
0
rtw e
pg. 41)
pg. 41)
Finalize A DVD-R/RW Disc
1
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
Alternatively, you can press FINALIZE to access the "FINALIZE"
setting on the "UTILITY" menu directly. For details, refer to "Direct
Access To "FINALIZE" Setting" (
3
Press rt w e to select "DVD SET UP", then press ENTER.
4
Press w e to select "UTILITY", then press ENTER.
5
To change the operation method of a DVD-R/RW (Video mode)
disc, press rt to select "DISC TYPE", then press ENTER. Press
rt to select the desired option, then press ENTER.
6
Press rt to select
"FINALIZE", then press ENTER.
Press w e to select "YES", then
press ENTER when "DISC WILL
BE FINALIZED" appears on the
TV screen.
7
Press w e to select "OK", then
press ENTER when "FINALIZING
WILL MAKE DISC READ-ONLY"
appears on the TV screen.
8
Press SET UP to return to the normal screen.
Menu screen is cleared.
You can select whether to finalize a disc automatically after dubbing.
For details, refer to "Auto Finalizing" (
Once a DVD-R/RW (Video mode) disc has been finalized, the
displays for original and play list do not appear. Only display for
library appears.
Once a DVD-RW (VR mode) disc has been finalized, it can be played
on DVD players compatible with VR mode.
* The boldface settings below indicate the settings at your purchase.
—
DISC TYPE MANUAL START
8
/
NO MENU
You can set the operation method of a DVD-R/RW (Video mode)
disc when finalizing the disc on this unit.
MANUAL START
:
When the DVD disc is loaded, the disc will stop after it has been
read. To play back the disc, press 4.
MENU STOP
:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. Playback will stop when the
disc menu is displayed.
AUTO REPEAT
:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. The disc will be played
repeatedly.
NO MENU
:
When the DVD disc is loaded, the disc will be played back
automatically after it has been read. All the titles on the disc will
be played back sequentially; playback will stop when the last title
is played.
SUBSIDIARY SETTINGS
EN
pg. 64).
pg. 46)
/ /
MENU STOP AUTO REPEAT
63