Digital Audio Dubbing - JVC SR MV45U Instructions Manual

EDITING
54
EN

Digital Audio Dubbing

You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
Example: Dubbing to an MD
Optical cable
(not supplied)
To [DIGITAL AUDIO
OUT (OPTICAL)]
Player
Note for connection:
Remove the protection cap from the cable.
Recorder
Digital audio device
(MD deck, etc.)
Coaxial cable
(not supplied)
To [DIGITAL AUDIO OUT
(COAXIAL)]
Rear of unit
1
Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
2
Place a disc on the unit and load an MD on the connected digital
audio device.
3
Select the audio to be dubbed.
4
Start playback slightly before the actual point from where you
wish to start dubbing.
5
Press 9 to pause playback.
6
Select the input mode on the connected digital audio device.
7
Press 4 to start playback on the unit.
8
Start recording on the digital audio device.
9
Stop recording on the digital audio device. Then press 8 to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where you
intend editing to start, and where it actually starts.