Edit To Or From Another Recorder - JVC SR MV45U Instructions Manual

Dvd video recorder & video cassette recorder
Table of Contents

Advertisement

Edit To Or From Another Recorder

You can use your unit as the source player or as the recording
deck.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
Recorder
TV receiver
Player
Your unit
Another recorder
Slide the TV/CABLE/DBS/DVD switch to DVD.
1
Make connections.
When using this unit as the recording deck
A If the another recorder has no S-VIDEO connector, connect the
unit's [AUDIO/VIDEO INPUT] connectors to the audio/video output
connectors on another recorder.
B If the another recorder has S-VIDEO connector, connect the
[AUDIO INPUT] and [S-VIDEO INPUT] connectors to the audio
and S-video output connectors on another recorder.
If connecting a unit with an S-VIDEO connector, it is recommended to
use the supplied S-Video cable to minimize picture degradation while
editing.
2
Press VCR/DVD repeatedly to select the recording deck.
3
Press INPUT SELECT +/– on the unit or INPUT +/– or AUX on
the remote control to select "L-1" when using this unit as the
recording deck.
Set "REAR AUX L-1" to "VIDEO" for the [VIDEO INPUT] connector,
or "S-VIDEO" for the [S-VIDEO INPUT] connector, depending on the
connector being used. (
VCR deck.
4
For VCR deck only
Set "PICTURE CONTROL" to the appropriate mode. (
5
Press REC MODE repeatedly to set the recording mode.
(
pg. 36)
6
Engage the Play mode of the source player.
For VCR deck only
Press 7 and 9 simultaneously to set to record pause mode.
7
Engage the Record mode of the recording deck.
For VCR deck only
After about 10 seconds, press 4 to start recording.
8
Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this unit as the source player for editing, be sure to set
"SUPERIMPOSE" to "OFF" before starting. (
When you select "EDIT" to dub tapes in step 4, be sure to select
"AUTO" (or "NORM" when "VIDEO CALIBRATION" is set to "OFF")
after you finish dubbing the tapes.
EDITING
pg. 59) This setting is also applied to the
pg. 59)
53
EN
pg. 61)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents