Sine-Wave Filter - Siemens SINAMICS G120 Operating Instructions Manual

Description
3.4 Components for the Power Modules
3.4.4

Sine-wave filter

The sine-wave filter at the inverter outputs almost sinusoidal voltages to
the motor, so that you can use standard motors without special cables.
The maximum permissible length of motor feeder cables is increased to
300 m.
The following applies when using a sine-wave filter:
• Operation is only permissible with pulse frequencies from 4 kHz to 8
kHz.
From 110 kW power rating of the Power Modules (according to the
rating plate) only 4 kHz is permissible.
• The inverter power is reduced by 5%.
• The maximum output frequency of the inverter is 150 Hz at 380 V to
480 V.
• Operation and commissioning may only be performed with the motor
connected, as the sine-wave filter is not no-load proof.
• An output reactor is superfluous.
Sine-wave filter for PM240 Power Module
Power Module 6SL3224-...
FSA
FSB
FSC
FSD
FSE
FSF
FSGX
34
...0BE13-7UA0, ...0BE15-5UA0,
...0BE17-5UA0
...0BE21-1UA0, ...0BE21-5UA0
...0BE22-2⃞A0, ...0BE23-0⃞A0
...0BE24-0⃞A0
...0BE25-5⃞A0
...0BE27-5⃞A0, ...0BE31-1⃞A0
...0BE31-5⃞A0, ...0BE31-8⃞A0
...0BE32-2⃞A0
...0BE33-0⃞A0, ...0BE33-7⃞A0
...0BE34-5⃞A0, ...0BE35-5⃞A0
...0BE37-5⃞A0
...0BE38-8UA0, ...0BE41-1UA0
...0XE41-3UA0
...0XE41-6UA0
...0XE42-0UA0
Power
0.37 kW ... 0.75 kW
1.1 kW ... 1.5 kW
2.2 kW ... 3.0 kW
4.0 kW
7.5 kW
11.0 kW ... 15.0 kW
18.5 kW ... 22 kW
30 kW
37 kW ... 45 kW
55 kW ... 75 kW
90 kW
110 kW ... 132 kW
160 kW
200 kW
250 kW
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
for FSF
Sine-wave filter
6SL3202-0AE20-3SA0
6SL3202-0AE20-6SA0
6SL3202-0AE21-1SA0
6SL3202-0AE21-4SA0
6SL3202-0AE22-0SA0
6SL3202-0AE23-3SA0
6SL3202-0AE24-6SA0
6SL3202-0AE26-2SA0
6SL3202-0AE28-8SA0
6SL3202-0AE31-5SA0
6SL3202-0AE31-8SA0
6SL3000-2CE32-3AA0
6SL3000-2CE32-8AA0
6SL3000-2CE33-3AA0
6SL3000-2CE34-1AA0