JVC DR-MH200SE Instructions Manual page 75

Manual Channel Set
Store channels that were not stored during Auto Set Up
(A pg. 17), Preset Download (A pg. 18) or Auto Channel Set
(A pg. 74).
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys to select ATUNER SETB, then press G.
4
Press selection keys to select AMANUAL CH SETB, then press
ENTER. The Manual Channel Set screen appears.
5
Press selection keys to select AEDITB, then press ENTER.
6
Press selection keys
to select a blank
position in which you
want to store a
channel, then press
ENTER. The
Confirmation screen
appears.
7
Press selection keys
to select ABANDB, then
press ENTER.
8
Press selection keys
to change the band
between CH (regular)
and CC (cable), then
press ENTER.
9
Press selection keys
to select ACHB, then
press ENTER.
10
Press selection keys
to input the channel
number you want to
store.
●
To enter the registered station name (A pg. 88), press
selection keys to select AIDB, then press ENTER. Press
selection keys.
●
For fine tuning adjustment, press selection keys to select
AFINEB, then press ENTER. Press F G to perform fine-tuning.
●
When storing a channel that sends scrambled broadcasts,
press selection keys to select ADECODERB, then press
ENTER. Press selection keys to set ADECODERB to AONB
(AOFFB is the default setting).
●
When AL-2 SELECTB is set to AVIDEOB, AS-VIDEOB,
ASAT VIDEOB or ASAT S-VIDEOB, the ADECODERB setting
cannot be changed. (A pg. 65)
11
Press ENTER to enter new channel information. The
Confirmation screen appears.
12
Press SET UP or RETURN to close the Confirmation screen.
●
To change positions, see AChange Station Channel PositionB
(A pg. 75).
●
If you wish to set station names other than the ones registered
in your unit, see ASet Stations (B)B (A pg. 76).
ATTENTION:
Guide Programme numbers are not set when channels are
stored manually. (A pg. 73, AS
(Example) To store in position 12.
INITIAL SET UP > MANUAL CH SET
PR CH ID PR CH
01 C01 ---- 07
02 02 CTEA 08
03 05 1000 09
04 C79 3SAT 10
9LIV
05 01 11
06 AB3 12
04
< >
MOVE EDIT
The programme currently received on the
selected channel position appears behind
the confirmation screen.
INITIAL SET UP > MANUAL CH SET
BAND
CH
ID
FINE
DECODER
RETURN
ENTER SELECT WITH @ THEN PRESS [ENTER]
SET UP
PRESS [SET UP] TO EXIT
EXIT SELECT
V System SetupB)
HOW IEW
Delete A Channel
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to delete.
3
Press CANCEL(L) to delete a channel. The channel next to
the cancelled one moves up one line.
●
Repeat steps 2 – 3 as necessary.
4
Press SET UP or RETURN to close the Confirmation screen.
Change Station Channel Position
1
Perform steps 1 – 4 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select AMOVEB, then press ENTER.
3
Press selection keys to select the channel you want to move,
then press ENTER.
4
ID
Press selection keys to select the new channel position, then
----
press ENTER.
----
Example: If you moved the station in position 4 to position 2, the
----
stations originally in positions 2 and 3 each move down
----
one space.
----
----
RETURN
CH
2
----
OFF
●
Repeat steps 3 – 4 as necessary.
5
Press SET UP or RETURN to close the Confirmation screen.
SUBSIDIARY SETTINGS
INITIAL SET UP > MANUAL CH SET
PR PR
CH ID CH
01 C01 ---- 07
02 CTEA
02 08
03 05 1000 09
04 C79 3SAT 10
05 01 9LIV 11
06 04 AB3 12
< >
MOVE EDIT RETURN
INITIAL SET UP > MANUAL CH SET
PR PR
CH ID CH
01 C01 ---- 07
C79 3SAT
02 08
03 02 09
CTEA
04 05 05
1000 10
05 01 9LIV 11
06 04 AB3 12
< >
MOVE EDIT RETURN
75
EN
ID
----
----
----
----
----
----
ID
----
----
----
----
----
----