Preset Download - JVC DR-MH200SE Instructions Manual

INITIAL SETTINGS
18
EN

Preset Download

Auto Channel Set by Downloading from TV/Auto Clock
Set/Auto Guide Programme Number Set
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.*
Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
ENTER
CABLE/SAT
TV DVD
Selection Keys
DE
If you have connected the unit to your TV via a 21-pin SCART
cable (A pg. 16), the unit will automatically perform Preset
Download instead of the Auto Set Up in step 4 on page 17. After
downloading, the unit sets the clock and Guide Programme
numbers automatically.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
●
Perform steps 1 to 3 of AAuto Set UpB (A pg. 17) before
continuing.
1
Press selection keys to
select AT-V LINKB and
press ENTER. The
T-V LINK screen will
appear.
●
When T-V LINK is
completed, ASCAN
COMPLETEDB appears
on the TV screen. Select
AOKB.
ATTENTION:
Preset positions on the front display panel increase from APR 1B;
do NOT press any button on the unit or remote control until the
front display panel shows clock time, APR 1B or A– –:– –B as
illustrated on page 19.
●
If you press any button on the unit or remote control while
downloading is in progress, it will be interrupted.
NOTES:
●
For details, refer to the instruction manual of your TV.
●
In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock
Set nor Auto Guide Programme Number Set.
● If there is a power cut, or if you press A or SET UP while
downloading or set up is in progress, it will be interrupted; be sure
to turn off the unit power once and try again from the beginning.
●
Auto Clock Set may not function properly depending on the
reception condition.
●
On this unit, the characters available for station names (ID) are
A–Z, 0–9, –, Z, + and & (space). Some names of downloaded
stations may differ from those of your TV. (A pg. 76)
After APreset DownloadB is completed, perform AMonitor SetB on
page 21.
INITIAL SET UP > AUTO CH SET
AUTO SET T-V LINK
ENTER SELECT WITH @ THEN PRESS [ENTER]
SET UP
PRESS [SET UP] TO EXIT
EXIT SELECT
INITIAL SET UP > T-V LINK
T-V LINK
PLEASE WAIT...
CANCEL
ENTER SELECT WITH @ THEN PRESS [ENTER]
SET UP
PRESS [SET UP] TO EXIT
EXIT SELECT