Tuner Set - JVC DR-MH200SE Instructions Manual

SUBSIDIARY SETTINGS
74
EN

Tuner Set

Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
IMPORTANT:
Perform the following steps only if ^
^ Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (A pg. 17, 18)
^ you have moved to a different area or if a new station starts
broadcasting in your area.
Auto Channel Set
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys to select ATUNER SETB, then press G.
4
Press selection keys
to select AAUTO CH
SETB, then press
ENTER.
5
Press selection keys
to select your country's
name, then press
ENTER.
6
Press selection keys
to select the language
of your choice.
CABLE/SAT
TV DVD
Selection Keys
FGDE
SET UP
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
TUNER SET CLOCK SET
AUTO CH SET MANUAL CH SET
SAT CONTROL SET GUIDE PROG SET
11
12
13
SET UP ENTER SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
7
Press ENTER twice.
●
When you have
connected the unit to a
TV offering T-V Link via
a fully-wired 21-pin
SCART cable
(A pg. 16), the unit
automatically performs
the Preset Download
and the T-V LINK
screen will appear.
(A pg. 18)
●
The Auto Set screen appears, and remains on screen while the
unit searches for receivable stations.
8
View the Confirmation screen.
AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is
displayed on the TV screen. Select AOKB.
9
Press SET UP to complete the setting.
●
Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations.
Refer to pages 75 – 76 for the procedures.
●
Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
●
For information on scrambled broadcasts, refer to AWhen
Receiving A Scrambled BroadcastB (A pg. 76).
IMPORTANT:
●
In certain reception conditions, station names may not be
stored correctly, and Auto Guide Programme Number Set may
not work properly. When the Guide Programme numbers are
not set properly, the programme that you do not intended to
record will be timer recorded by the S
unit. When programming the timer using the S
system, be sure to check the desired channel is selected
correctly. (A pg. 45)
●
Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (A pg. 75, ADelete A
ChannelB)
NOTES:
●
Fine tuning is performed automatically during Auto Channel Set.
If you want to perform tuning manually, refer to AFine-Tuning
Channels Already StoredB (A pg. 76).
●
If you perform Auto Channel Set when the aerial cable is not
connected properly, ASCAN COMPLETED -NO SIGNAL-B
appears on the TV screen in step 8. In such a case, make sure of
the aerial connection and press ENTER; Auto Channel Set will
start again.
●
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels. (A pg. 76,
INITIAL SET UP
AINFORMATIONB).
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
SET UP ENTER SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
V system of the
HOW IEW
V
HOW IEW