JVC DR-MH200SE Instructions Manual page 44

LIVE MEMORY PLAYBACK
44
EN
Temporary recording for Live Memory (HDD deck only)
This unit automatically records the channel being received, within
the specified range of time, to the reserved space on the hard disc.
The time range can be set for 30 minutes, 1 hour, and 3 hours.
(A pg. 71)
NOTE:
Previous temporary recordings will be overwritten since the unit is
always recording the channel being received. Thus, it is not
possible to play back TV programmes recorded beyond the
specified range of time since they are already overwritten. To avoid
this in order to save titles, perform normal recording (A pg. 38),
timer recording (A pg. 45, 47), or RetroActive Recording
(A pg. 44).
About limitation on temporary recording
The temporary recording for Live Memory is cancelled in the
following cases, and will start all over again when it is to resume.
●
When the power is turned off
●
When the system is powered again after a power failure was
occurred
●
When normal recording, timer recording, RetroActive
Recording, or Automatic Satellite Programme Recording
(A pg. 49) is performed
●
When the ALIVE MEMORYB setting is changed (A pg. 71)
●
When tuner channel setting is performed (A pg. 74)
●
When dubbing is performed by pressing DUBBING (A pg. 58)
●
When ADVB is selected by pressing PR +/– (A pg. 60)
RetroActive Recording (HDD deck only)
You can start recording from the previous part of the channel you
are currently watching (temporarily recorded on the background).
(A pg. 44, ATemporary recording for Live Memory (HDD deck
only)B)
1
Press S or O to locate the point to start recording from.
● Each press of O increases the reverse search speed.
2
Press R on the unit to start RetroActive Recording. Or while
holding R, press I on the remote control.
3
Press o to stop RetroActive Recording.
●
The on-air screen resumes.
NOTES:
●
You cannot use RetroActive Recording for channels other than
the channel you are currently watching.
●
Recording speed is automatically set to FR65 mode when
RetroActive Recording is started.
●
Temporarily recorded data prior to the beginning of RetroActive
Recording is erased when RetroActive Recording started.
Simultaneous Recording and Playback
You can play back the previous part of the channel you are
recording or other programs available in the Library Database.
1
Press NAVIGATION.
The Library Database
Navigation screen
appears.
2
Press selection keys
to select AORIGINALB,
then press ENTER.
3
Press selection keys
to select the desired
title, then press
ENTER.
●
For DVD-RAM,
playback starts from the beginning of the title if ACONTINUOUS
PLAYB in ADVD SET UPB is set to AONB (A pg. 71).
4
Press selection keys to select the desired playback method
(ABEGINNINGB, ARESUMEB or AREPEATB), then press ENTER.
●
Playback of the selected title begins automatically.
5
Press o to stop playback.
●
The on-air screen resumes.
NOTES:
●
You can use various playback features during Live Memory
Playback. (A pg. 40)
To stop simultaneous playback, press o. The on-air screen
●
resumes. To stop actual recording, press o again.
One Touch Replay
You can move back the playback position slightly during recording
or Live Memory Playback.
Press w.
8 DVD-RAM
●
Pressing once during recording skips back for approximately
30 seconds and starts Live Memory Playback. While pressing
once during Live Memory Playback skips back for approximately
7 seconds and resumes playback.
●
Each subsequent press skips back for approximately 7 seconds
and resumes playback.
●
Pressing while paused skips back for approximately 7 seconds
and resumes pause.
8 HDD
●
Pressing during recording skips back for approximately
7 seconds and starts Live Memory Playback. While pressing
during Live Memory Playback skips back for approximately
7 seconds and resumes playback.
●
Each press skips back for approximately 7 seconds and resumes
playback.
●
Pressing while paused skips back for approximately 7 seconds
and resumes pause.
Resuming Playback (HDD deck only)
You can resume playback of a TV broadcast you were recording or
watching from the point you have paused.
1
Press W to pause a TV broadcast.
●
Recording continues when recording.
2
Press I to start Live Memory Playback.
●
Playback resumes from the paused position.
3
Press o to resume the on-air screen.
NAVIGATION
HDD NAVIGATION
ORIGINAL PLAY LIST
SELECT WITH @
THEN PRESS [ENTER]
PRESS [NAVIGATION]
HDD LIBRARY
TO EXIT
A A
CATEGORY
NAVIGATION ENTER
EXIT
SELECT
Navigation top screen for HDD deck.
NAME