System Setting - JVC xv-thm45 Instructions Manual

Dvd digital cinema system, consists of xv-thm45, sp-pwm45, sp-thm45c, sp-thm45f, sp-thm45s
Hide thumbs Also See for xv-thm45:
Table of Contents

Advertisement

System setting

You can adjust the sound and speaker settings of this system.
• The adjustments on a source take effect for the other sources.
IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to AUDIO.
NOTE
Before you start operation;
• There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
• When selecting DVD as the source, the settings of the corresponding
items in the choice menus also change.
On the remote control:
1
Press SETTING.
The item you last selected appears on the display window.
Example: "BAL" has been selected.
2
Press Cursor //5 repeatedly to select
the item you want to set.
Each time you press the button, the items shown on the display
window change as follows:
O FRNT SP O CNTR SP O SURR SP O FRNT D O
CNTR D O SURR D O CROSS O LFE ATT. O BAL O
D. COMP O AUDIO POS O (back to the beginning)
See the corresponding pages for details on the related
adjustments except for "AUDIO POS".
• FRNT SP (front speakers),
CNTR SP (center speaker),
SURR SP (surround speakers):
Select the size of each speaker. (A pg. 52)
• FRNT D (front speakers distance),
CNTR D (center speaker distance),
SURR D (surround speakers distance):
Adjust distance from the listening position to the speakers.
(A pg. 52)
• CROSS:
Select the cutoff frequency of the subwoofer. (A pg. 52)
• LFE ATT.:
• BAL:
• D. COMP (Dynamic Range Compression):
Cursor
(3/2///5)
• AUDIO POS (Audio Position):
3
Press Cursor 3/2 to make an
adjustment or selection.
Example:
• FRNT SP, CNTR SP, SURR SP:
• FRNT D, CNTR D, SURR D:
• CROSS:
• LFE ATT.:
• BAL:
• D. COMP:
• AUDIO POS:
4
Repeat steps 2 and 3 to set other items.
NOTE
• If you selected "SML" for the front speakers, you cannot select
"LRG" for the center and surround speakers.
• You can confirm your adjustment of speaker settings by listening to
the test tone. To output the test tone, press TEST. (A pg. 34)
Diminish the distortion of the bass sound from the
subwoofer while playing back a disc with Dolby Digital or
DTS Digital Surround. (A pg. 51)
You can adjust the balance between the front left and front
right speakers. (A pg. 51)
You can enjoy low level recorded sound clearly at night even
at a low volume level when listening to the sound with
Dolby Digital. (A pg. 51)
Set the audio position of subwoofer so that the subwoofer
level can be automatically adjusted properly. (The smaller
the number becomes, the more the level decreases
automatically when listening in stereo.)
"SML" (small) O "LRG" (large)
Within the range between 0.3 m and 9.0 m. (by 0.3 m
step)
"80Hz" O "100Hz" O "120Hz" O "150Hz" O "200Hz"
O (back to the beginning)
"ON" O "OFF"
"L-21" to "L-1" O "CENTER" O "R-1" to "R-21"
"MID" O "MAX" O "OFF" O (back to the beginning)
"0" O "–2" O "–4" O"–6" O (back to the beginning)
56

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp-pwm45Sp-thm45cSp-thm45fSp-thm45sTh-m45

Table of Contents