JVC xv-thm45 Instructions Manual page 16

Getting started
7 Connecting the satellite (front, center, surround) speakers
Be sure to identify each speaker (SP-THM45C/SP-THM45F/SP-THM45S) and connect them to the corresponding terminals of the
powered subwoofer.
CAUTION
• When you connect (larger) speakers other than the supplied ones, only use speakers with the same speaker impedance (SPEAKER IMPEDANCE)
as indicated by the speaker terminals on the rear of the powered subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
Before connecting the
speaker cords;
Twist and pull the
insulation coat off and
remove.
Center speaker
(SP-THM45C)
CAUTION
When installing the satellite speakers on the wall;
• Be sure to have them installed on the wall by a qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation
or weakness in wall structure.
• Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers
installed interfere with daily activities.
11
Front speakers (SP-THM45F)
Surround speakers
(SP-THM45S)
Press and hold Insert the bare end of the
the clamp. speaker cord into the
terminal.
• Connect the white cords to the red (ª) terminals and black cords
to the black (·) terminals.
Powered subwoofer
Black
Release the
clamp.
White
Red
Black